Teak Oil Νερού – High protection

WATER oil for garden furniture made of teak or other exotic woods

Syntilor's highly protective water-based TEAK Oil is a real care product for all types of wood.

Teak Oil Νερού – High protection

WATER oil for garden furniture made of teak or other exotic woods

Syntilor's highly protective water-based TEAK Oil is a real care product for all types of wood.

COLORS

Φυσικό ξύλο/Naturel
Φυσικό ξύλο/Naturel

1,0L

Syntilor’s high-protection water-based TEAK Oil is a real care for all types of wood. Specially designed for outdoor use, it impregnates, nourishes and protects, avoiding graying. It highlights the natural elegance of garden furniture, offering them a beautiful “oiled wood” finish. It provides high protection against UV radiation and bad weather conditions.

Tools

Brush, Cloth

Cleaning
tools

Water

Drying between coats

30' min

Back in
service

12 h

Number of
layers

2
BENEFITS
  • For all types of wood
  • Nourishes and protects
  • Quick drying 30 minutes
  • Does not peel
INFORMATION

A real care for garden furniture. Syntilor’s High Protection Water-Based TEAK Oil impregnates, nourishes and protects all wood, giving it a beautiful matte natural look.

Offers maximum protection against UV rays, weather conditions and stains.

For all types of wood: exotic, European, pre-impregnated. Directly on new wood without prior aging.

Easy application without wiping, guaranteed streak-free results.

Quick drying: furniture can be reused the next day.

Easy maintenance: allows local maintenance and treatment without sanding. Natural aging without cracking.

Preparation

  • New Exotic Wood: Degrease with a cloth soaked in acetone.
  • Old untreated wood, with impregnating varnish or greyed: clean using Syntilor’s greyed wood cleaner Dégriseur Nettoyant.
  • Old finishes (old paints, varnishes, etc.): sand with sandpaper No. 40, 60 and then 100 or remove old substrates with Syntilor’s abrasive Décapant Gel Multi-Supports If necessary, apply a coat of a suitable wood treatment product against wood-eating insects.

PROFESSIONAL TIP: A light sanding (sandpaper No. 100), before application, on all surfaces, will open the pores and facilitate penetration.

Application
  • Ready to use, do not dilute
  • Mix well before and during use, do not dilute.
  • Apply a first thin coat in the direction of the wood fibers (well soak the grooves, joints and edges).
  • Leave to penetrate for 20 to 30 minutes.
  • Apply the 2nd thin coat as soon as the wood loses its “wet” appearance. Brush off any excess product to avoid drips or shine on the surface.
  • NO WIPING NEEDED
  • Surfaces can be used 12 hours after application.

Maintenance

  • As soon as the wood surface begins to naturally lighten from weathering and UV radiation, apply Syntilor High Protection Water-based TEAK Oil directly to the lightened areas.
  • In case of delayed maintenance, first clean with Syntilor Dégriseur Nettoyant, a cleaner for greyed wood.

Complementary products

You may also like