Saturateur Terrasses & Bardages biosourcé

Long-lasting impregnation product that protects, deeply nourishes and slows down the graying of all horizontal and vertical exterior wooden cladding

It gives a beautiful matte natural appearance with high resistance to bad weather conditions.

Saturateur Terrasses & Bardages biosourcé

Long-lasting impregnation product that protects, deeply nourishes and slows down the graying of all horizontal and vertical exterior wooden cladding

It gives a beautiful matte natural appearance with high resistance to bad weather conditions.

COLORS

Φυσικό ξύλο / Naturel
Εξωτικό ξύλο / Bois Exotique
Γκρι ξύλο / Bois Grise
Φυσικό ξύλο / Naturel
Εξωτικό ξύλο / Bois Exotique
Γκρι ξύλο / Bois Grise

0,75L – 2,5L

Saturateur Terrasses & Bardages biosourcé is a long-lasting impregnation product that deeply protects and nourishes all horizontal (terraces, pool surrounds) and vertical exterior wood (cladding, canopies, pergolas, privacy screens, fences, etc.), giving them a beautiful matte natural appearance.

Tools

Paintbrush, Paintbrush, Roller

Cleaning
tools

Water

Drying between coats

30΄min

Back in
service

12 h

Number of
layers

2
BENEFITS
  • For all types of horizontal and vertical timber
  • Easy application without wiping
  • Maintains the raw and natural appearance of the wood
  • Does not crack
  • Directly on new wood, without prior aging
  • Application in 2 coats wet on wet
  • Quick drying: 30 minutes between 2 coats
  • Easy maintenance: no sanding, local renovation
  • High resistance to UV radiation and enhanced beading effect
  • Anti-slip: tested according to NF EN 13036-4
  • Resistance to chlorinated water
INFORMATION

Saturateur Terrasses & Bardages biosourcé is a long-lasting impregnation product that deeply protects and nourishes all horizontal (terraces, pool surrounds) and vertical exterior wood (cladding, canopies, pergolas, privacy screens, fences, etc.), giving them a beautiful matte natural appearance.

  • High resistance: up to 4 years of resistance on vertical wood*
  • Terraces: resistant to chlorinated water and stains, non-slip.
  • All types of wood: Exotic, Pine, Douglas Fir, Red Cedar

Contains 87% natural, mineral and organic ingredients (not from organic farming), including 20% ​​organic carbon measured according to the NF EN 16640 standard.

Preparation

  • New exotic wood: degrease with acetone
  • Old, stained or greyed raw wood: clean with Syntilor – Dégriseur Nettoyant or completely restore the raw wood by sanding successively with sandpaper (grit 40, 60 and then 80).
  • Painted, stained or varnished wood: strip the wood (sand with sandpaper 40, 60 and then 80 or remove with Syntilor corrosive).
  • If necessary, treat the surface with a suitable product against wood-eating insects.

SYNTILOR tip: a light sanding (grit 80 sandpaper), after preparation, will open the pores and facilitate penetration.

 

Application

The wood must be dry (3 days of good weather before application, no rain within 24 hours after the 2nd coat). Do not apply in direct sunlight or at temperatures above 25°C.

  • Mix well before use, do not dilute.
  • Apply a first thin coat in the direction of the wood fibers (well soak the grooves, joints and edges). Leave to penetrate for 20 to 30 minutes.
  • Apply the 2nd thin coat as soon as the wood loses its “wet” appearance. Apply the excess product with a brush to avoid running or highlighting marks.
  • Terraces: wait at least 12 hours before returning to traffic.

 

Maintenance

  • Apply a new coat of Saturateur Terrasses & Bardages directly to areas that have lightened or faded due to UV rays and bad weather.
  • Delayed maintenance: see step 2 of the preparation.

Complementary products

You may also like