Meteore 14 Fine

Ready-to-use, fine-grained, resin-based structural product in paste form, for interior and exterior use

It is designed as part of VALPAINT's resin cement mortar systems, i-Beton & i-Beton PLUS.

Meteore 14 Fine

Ready-to-use, fine-grained, resin-based structural product in paste form, for interior and exterior use

It is designed as part of VALPAINT's resin cement mortar systems, i-Beton & i-Beton PLUS.

DOWNLOAD THE COLOR CHART HERE

1,0L – 4,0L – 12,0L

Meteore 14 Fine is part of VALPAINT’s one-component resin cement mortar systems, i-Beton & i-Beton PLUS. It is a fine-grained (0.1mm) structural coating with high anchoring properties, to be applied as a third layer over at least 2 layers of Meteore 14 Medio.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

DOWNLOAD THE VIDEO IBETON PLUS system HERE

DOWNLOAD THE VIDEO IBETON system - FLOORS HERE

DOWNLOAD THE VIDEO IBETON system - WALLS HERE

Tools

Stainless steel spatula PV43 or PV44

Cleaning
tools

Water

Drying between coats

8 - 12 h

Back in
service

18 - 24 h

Number of
layers

Resistant to falls, impacts and intense friction
Complete absence of hazardous substances
With very low emissions of organic compounds (VOC)

Meteore 14 Fine is part of VALPAINT’s one-component resin cement mortar systems, i-Beton & i-Beton PLUS. It is a fine-grained (0.1mm) structural coating with high anchoring properties, to be applied as a third layer over at least 2 layers of Meteore 14 Medio.

Preparation and Application

The surfaces to which Meteore 14 Fine is applied must be dry and solid, free of cracks and moisture. The application conditions refer to stable standard environmental conditions (Θ = 20°C and relative humidity UR = 65%). Conditions other than those indicated can significantly modify the drying times. For more information, see the relevant Technical Brochure.
FINISH: for interior use and as the third (3rd) and final layer of the I-BETON system. Meteore 14 Fine is applied, instead of Meteore 14 Medio, using the PV 43/44 stainless steel trowel. Then spray the entire surface with water using the water sprayer. Complete the application by pressing immediately with movements of the trowel in all directions, achieving a finish that is as smooth and solid as possible.

Protection

For floors that will be exposed to high humidity: after 16 hours at 20°C, apply a thin layer of the 2-component resin OTTURAPORI OTB + CT45 using a mohair roller. After 24 hours at 20°C, sand with 220/300 grit sandpaper before applying two coats of the protective resins TOP COAT AR60 Lucido (glossy) or TOP COAT AR70 Opaco (matt).
For other surfaces: After 16-24 hours at 20°C, apply two to three coats of the protective resins TOP COAT AR60 Lucido (glossy) or TOP COAT AR70 Opaco (matt).

Interior use

Exterior use

Varnishes - Impregnation products for outdoor use

Varnishes - Wood finishing products for interior use

Wood Floors & Flooring

Artists & DIY paintings - Chalk Paints

Decoration products & Coatings

Decoration tools

Fillers & Smoothing compounds

Bio based & ECO

Meteore 14 Fine

Ready-to-use, fine-grained, resin-based structural product in paste form, for interior and exterior use

It is designed as part of VALPAINT's resin cement mortar systems, i-Beton & i-Beton PLUS.

Meteore 14 Fine

Ready-to-use, fine-grained, resin-based structural product in paste form, for interior and exterior use

It is designed as part of VALPAINT's resin cement mortar systems, i-Beton & i-Beton PLUS.

DOWNLOAD THE COLOR CHART HERE

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

DOWNLOAD THE VIDEO IBETON PLUS system HERE

DOWNLOAD THE VIDEO IBETON system - FLOORS HERE

DOWNLOAD THE VIDEO IBETON system - WALLS HERE

Tools

Cleaning
tools

Drying between coats

Back in
service

Number of
layers

Complementary products

Spatula Inox PV43

High quality stainless steel lightweight spatula for Valpaint techniques

Top Coat AR 70 Opaco + CT80

Transparent Matt finish, two-component, specially formulated and very resistant to chemical agents

Top Coat AR 60 Lucido + CT80

Transparent Glossy two-component finish, specially formulated and very resistant to chemical agents

Meteore 14 Medio

Ready to use, medium-grained, resin-based structural product in paste form, for interior and exterior use

You may also like

Meteore 10 Cemento

Natural, lime-based decorative effect coating, for interiors and exteriors

Companies

Meteore 14 Fine

Ready-to-use, fine-grained, resin-based structural product in paste form, for interior and exterior use

It is designed as part of VALPAINT's resin cement mortar systems, i-Beton & i-Beton PLUS.

Meteore 14 Fine

Ready-to-use, fine-grained, resin-based structural product in paste form, for interior and exterior use

It is designed as part of VALPAINT's resin cement mortar systems, i-Beton & i-Beton PLUS.

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Cleaning tools

Drying between coats

Back in service

Number of layers

Complementary products

High quality stainless steel lightweight spatula for Valpaint techniques

Transparent Matt finish, two-component, specially formulated and very resistant to chemical agents

Transparent Glossy two-component finish, specially formulated and very resistant to chemical agents

Ready to use, medium-grained, resin-based structural product in paste form, for interior and exterior use

You may also like

Natural, lime-based decorative effect coating, for interiors and exteriors

Companies

Ρυθμίσεις Απορρήτου

Παρακάτω μπορείτε να ενεργοποιήσετε ή απενεργοποιήσετε τους διαφορετικούς τύπους cookies:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Cleaning
tools

Back in
service

Number of
layers