Vieroquartz

Acrylic white quartz primer-paint for exterior and interior use

Suitable for use on thin two-layer cement mortar plasters, cement mortar or prefabricated cement elements. Also applicable to gypsum boards.

Vieroquartz

Acrylic white quartz primer-paint for exterior and interior use

Suitable for use on thin two-layer cement mortar plasters, cement mortar or prefabricated cement elements. Also applicable to gypsum boards.

COLORS

Λευκό
Λευκό

5,0Kg

Vieroquartz is a quartz-based primer with an extremely matt appearance, useful for filling and preparation. It can be used both as a base product for decorative effects (ensuring adhesion on difficult substrates) and as a finishing product. It is suitable for use on thin two-layer cement mortar plasters, cement mortar or prefabricated cement elements. It is also applicable to plasterboards.

Tools

Roller, Brush, Airless Gun

Cleaning
tools

Water

Drying between coats

4-8 h

Back in
service

24 h

Number of
layers

1-2
BENEFITS
  • Exterior – Interior use
  • For New, aged, homogeneous wall surfaces with two-layer plaster
  • For wall surfaces made of cement, lime-cement mortar, already coated, painted or partially damaged
  • Paint based on acrylic copolymers, inorganic pigments, micronized fillers
  • The type of binder used gives the product excellent resistance to alkalis and atmospheric agents
  • Excellent adhesion to the substrate, excellent applicability and workability
  • Can be colored in VIERO coloring machines
  • The use of light-resistant and alkali-resistant pigments ensures color stability even on walls exposed to UV radiation and bad weather conditions
  • A+ composition
INFORMATION

Vieroquartz is a quartz-based primer with an extremely matt appearance, useful for filling and preparation. It can be used both as a base product for decorative effects (ensuring adhesion on difficult substrates) and as a finishing product. It is suitable for use on thin two-layer cement mortar plasters, cement mortar or prefabricated cement elements. It is also applicable to plasterboards.

Preparation

NEW WALL SURFACES

  • Concrete, gypsum boards and cement-based plasters: make sure the substrate is dry and stable. Always first apply a coat of PRYMER ACQ acrylic water-based stabilizing primer to regulate absorption and wait at least 6-8 hours.

 

OLD SURFACES ALREADY PAINTED or PARTIALLY DEGRADED

  • In the event of dirt and mold, before carrying out any intervention, it is necessary to treat with specific anti-mold disinfectant products, taking care to let them act before proceeding with appropriate cleaning.
  • Rub well (mechanically or manually) to remove any element that is detached or in any case not perfectly cohesive and anchored to the substrate. Assess whether it is necessary to completely remove the old paint.
  • In case of chalking on external surfaces, it is necessary to apply a layer of PRYMER ACQ 100 high-penetration acrylic water-stabilizing primer and wait 24 hours.
  • In case of chalking on interior surfaces, apply a coat of PRYMER ACQ acrylic water-based stabilizing primer and wait at least 6-8 hours.

 

WALL SURFACES WITH LIME PLASTER or CEMENT-LIME

  • In case of chalking, it is necessary to apply a layer of high-penetration acrylic water-based stabilizing primer PRYMER ACQ 100. After 24 hours, proceed to apply a layer of VIEROQUARTZ and wait at least another 24 hours before applying the final finish.

 

Application

  • Use Vieroquartz primer as a finish, white or colored, diluting the first coat with 15-20% water by volume, mix the product until a homogeneous mass is obtained and apply it evenly with a brush or roller.
  • Apply the second coat diluting with 10-15% water after no less than 8-12 hours.
  • Use Vieroquartz, possibly colored, (one or two coats depending on requirements) as a primer for decorative paints and coatings.
  • Apply evenly with a roller or brush.
  • After 6-8 hours apply the selected finish.
  • Do not apply on walls facing the sun or where the ambient or substrate temperature may fall below +5°C or rise above +35°C in the first 24 hours after application. Relative humidity should not exceed 75%.

Complementary products