Peinture ECO Velours

Wall paint made from 50% recycled materials

Water-based paint for interior use, matte-velvet finish.

Peinture ECO Velours

Wall paint made from 50% recycled materials

Water-based paint for interior use, matte-velvet finish.

0,5L – 2,0L

ECO Velours wall paint is a smooth paint with a velvety finish for walls and woodwork. The resin used in ECO Paint comes from recycled car windshields. The carbon footprint of the product is 6 to 7 times lower than a conventional water-based resin. The fillers that provide coverage in the paint come from recycled locally produced shells and oysters. The packaging is made of metal, recyclable even when dirty (to be disposed of at a recycling center after use).

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Roller, Brush

Cleaning
tools

Water

Drying between coats

4 h

Back in
service

12 h

Number of
layers

1-2
BENEFITS
  • Very covering
  • Multi-surface
  • Odorless
  • Washable
  • Paint made from 50% recycled materials
  • A+ product
  • Eco label product
  • Very low carbon footprint
INFORMATION

ECO Velours wall paint is a smooth paint with a velvet finish for walls and woodwork. The resin used in ECO Paint comes from recycled car windshields. The carbon footprint of the product is 6 to 7 times lower than a conventional water-based resin. The fillers that provide coverage to the paint come from recycled locally produced shells and oysters. The packaging is made of metal, recyclable even when dirty (deposit at a recycling center after use). The number of Volatile Organic Compounds is < 1g/liter for better air quality.

Preparation

The application surfaces must be solid, clean and dry.

  • Over old paints: Wash and rinse with water. Apply a coat of Primer ECO with a roller or a wide brush.
  • On plaster, drywall and porous substrates: sand and remove dust. Apply a first coat of Primer ECO diluted with 5% water. Let dry for ±4 hours and then apply a second undiluted coat.
  • Do not apply to wallpaper.

 

Application

  • Stir well before use. No dilution required.
  • Apply the paint with a 5mm nap microfiber ripoline roller or foam roller.
  • Apply evenly over a surface of 1 to 2 m² to avoid marks and joints. Apply crosswise first from top to bottom and then from left to right. Finish by finishing from top to bottom.
  • Let dry for 4 hours and then apply a second coat if necessary.

You may also like