Océanic® Air Protect®

One-component, pure polyurethane floor varnish

The single-component, pure polyurethane Océanic® Air Protect® floor varnish ensures very high resistance to chemical and mechanical attacks.

Océanic® Air Protect®

One-component, pure polyurethane floor varnish

The single-component, pure polyurethane Océanic® Air Protect® floor varnish ensures very high resistance to chemical and mechanical attacks.

COLORS

Άχρωμο/ Incolore/Σατινέ & Γυαλιστερό
Άχρωμο/ Incolore/Σατινέ & Γυαλιστερό

1,0L – 2,5L

The single-component, pure polyurethane floor varnish Océanic® Air Protect® ensures very high resistance to chemical and mechanical attacks. It has CTB Certification for the performance of the wood finishing system and the quality of the services. It leaves the wood with its natural color and highlights its veins. Based on the latest technologies, the Océanic® Air Protect® composition prevents up to 80% of emissions from the parquet floor and purifies the air in the room. Enhanced filling power. Allows rapid recirculation of spaces.

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Paintbrush, Paintbrush, Roller

Cleaning
tools

Water

Drying between coats

2 h

Back in
service

12 h

Number of
layers

3
BENEFITS
  • Pure single-component polyurethane product
  • Improves indoor air quality thanks to the Air Protect® innovation: blocks 80% of VOC emissions
  • Long-term protection of parquet floors against chemical and mechanical attacks
  • Extremely resistant to stains, abrasions, impacts and scratches
  • Increased filling power
  • Non-slip (tested according to NF EN 13036-4)
  • Fire classification CflS1 (certificate on request)
  • For all types of wood
  • Very pleasant to apply
  • Leaves the wood in its natural color
  • Rapid return to traffic in application areas
  • Odorless
INFORMATION

Blanchon Océanic® Air Protect® Water-based Floor Varnish is a pure polyurethane composition and provides long-lasting protection for wooden floors against chemical and mechanical wear, leaving the wood in its natural color.

Its technical performance and composition, with a very low VOC content, comply with the highly selective environmental requirements of the European Ecolabel. Blanchon Océanic® Air Protect® Floor Varnish, a product of the latest in professional floor varnish technology, is enhanced by Air Protect® technology: a real innovation that improves indoor air quality, thanks to a formaldehyde absorber.

Air Protect innovation: blocks 80% of formaldehyde emissions coming from the floor, absorbs up to 40% of formaldehyde emissions in the room (laboratory test: comparative measurements taken in a single room over 28 days).

  • High performance applicable to all types of wooden parquet (rarely on exotic woods, if applicable contact us).
  • Indoor use only

Preparation

  • Océanic® Air Protect® floor varnish should be applied to wooden floors that have been previously well sanded or even bare wood (cleaning with abrasives is not recommended), which have been cleaned of dust and all traces of detergent, grease, wax, varnish or linoleum oil (or other special oils).
  • The wooden floor must be completely clean and dry. As a general rule, the moisture content of the wood should be below 10% (do not use detergents, bleaches or wood floor cleaners).
  • Remove all traces of dust.
  • Treatment against wood-eating insects: Use only treatment products recommended by Blanchon.
  • Wood staining: Wooden floors that have been sanded down to bare wood can be stained with Teinte Bois water-based stain or Blanchon Wood Ageing Agent. After using these products and once they have dried, apply a coat of Blanchon Preplast® Primer to seal the paint.
  • In all cases, do not sand the paint. It is recommended to sand the wooden floor before applying the final coat of Océanic® Air Protect®, once the previous coat has dried completely (approximately 2 hours). Carefully remove all traces of dust before applying the final coat of Océanic® Air Protect®.
  • Using a Blanchon primer as a first coat allows for the rapid application of 2 coats of Océanic® Air Protect®, thus saving time.

 

Application

  • Ready to use, do not dilute.
  • Shake the package well before use.
  • Apply 3 uniform and well-filled coats with a brush, trowel or roller.
  • Let dry for 1 hour between each coat, then sand lightly (sandpaper No. 120 to 180) and dust thoroughly. Do not exceed 48 hours between 2 coats.
  • Reuse spaces within 12 hours after the last coat. Take some precautions during the first 7 days. Do not install carpets for 10 days.

MAINTENANCE: Daily cleaning: Use Nettoyant Parquets Vitrifiés et Stratifiés Syntilor frequently and regularly.

Occasional maintenance: Use Savon Raviveur Parquets Vitrifiés et Stratifiés Syntilor.

Annual renovation: to renovate and provide a protective layer and hide scratches and signs of wear, use Rénovateur Vitrilor® Parquets Vitrifiés et Stratifiés Syntilor.

You may also like