La Casa dei Sogni

La Casa dei Sogni is a water-based decorative paint

It allows the effect of an old wall, which has naturally aged over time, to be reproduced.

La Casa dei Sogni

La Casa dei Sogni is a water-based decorative paint

It allows the effect of an old wall, which has naturally aged over time, to be reproduced.

1,0L – 2,5L – 5,0L

La Casa dei Sogni is a water-based decorative paint that allows you to obtain the effect of a wall that ages naturally over time. It can be applied to any surface, properly prepared.

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Style glove

Cleaning
tools

Water

Drying between coats

4 h

Back in
service

12 h

Number of
layers

1
BENEFITS
  • Single layer
  • Zero VOC emissions
  • A+ product
  • Easy and quick application
INFORMATION

La Casa dei Sogni is a water-based decorative paint that allows you to obtain the effect of a wall that ages naturally over time. It can be applied to any surface, properly prepared.

Preparation

Old surface: remove all loose old and peeling paint and clean. Then, apply a stabilizing primer depending on the type of surface. When the primer is completely dry, apply a layer of PRIMUS SABBIA. After 4-6 hours at 20°C, proceed with the application of La Casa dei Sogni.

New surface: clean (and if necessary, fill-spatula) the surface you want to paint. Once dry, sand the surface and apply a layer of suitable primer. When the primer is completely dry, apply a layer of PRIMUS SABBIA. After 4-6 hours at 20°C, proceed with the application of La Casa dei Sogni.

Note: When the substrate is plasterboard, the surface must be spatulated in its entirety and not just at its joints and screws. It must then be primed with a suitable drywall primer and then follow the above preparation process.

 

Application

  • The product is ready to use, do not dilute.
  • Application tools: with the GG&f style glove.
  • Take enough material with the Giorgio Graesan & friends fur glove. Start distributing the material on the wall surface with the classic palm movement. Keep the edge of the glove clean. If you want the work to look more aged, pass the glove lightly over the surface after 15-30 minutes. If you want to achieve a more uniform look, apply the same product again.

 

Protection

With VETRO water-based varnish: Protective water-based varnish. The product is ready to use. Let the surface to be applied dry for at least 48 hours. Apply 1 or 2 coats with a brush or roller.

Complementary products

You may also like