Klondike®

Decorative paint with aged metallic effect

It is a distinctive modern and elegant water-based decorative paint for interior use. It can be applied to a wide range of surfaces thanks to its unique colors and shades.

Klondike®

Decorative paint with aged metallic effect

It is a distinctive modern and elegant water-based decorative paint for interior use. It can be applied to a wide range of surfaces thanks to its unique colors and shades.

1,0L2,5L

Klondike® is a typically modern and elegant decorative water-based paint for interior use. It can be applied to a wide range of surfaces. Thanks to its unique colors and shades, it can be used to create extremely contemporary and modern living spaces. The decorated surfaces highlight the precious metal fragments incorporated into the paint, enhancing the gold, silver and oxidized effects.

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Klondike Brush PV76, Stainless Steel Spatula PV43

Cleaning
tools

Water

Drying between coats

5-6 h

Back in
service

24 h

Number of
layers

2
BENEFITS
  • A+ Product
  • Complete absence of hazardous substances
  • It is a typically modern and elegant decorative water-based paint for interior use
  • Application in 2 coats
INFORMATION

Klondike® can be applied to a wide range of surfaces. Thanks to its unique colors and shades, it can be used to create extremely contemporary and modern living spaces. The decorated surfaces highlight the precious metal fragments incorporated into the paint, enhancing the gold, silver and oxidized effects. This achieves the perfect result: rooms are framed by metal walls that create contemporary spaces. It is a high-quality product, breathable, washable and can be repainted with any other water-based paint.

 

Preparation

  • Old wall: remove all old, loose and flaking paint and clean. Then apply a stabilizing primer depending on the type of surface. When the primer is completely dry, apply a coat of PRIMER 900 and after 6 hours at 20°C, proceed with the application of Klondike®.
  • New wall: clean (and if necessary, fill/fill) the surface to be painted. Once dry, sand the surface and apply a coat of suitable primer. When the primer is completely dry, apply a coat of PRIMER 900 and after 6 hours at 20°C, proceed with the application of Klondike®.
  • Wood, glass, light alloys and painted iron: remove all grease from the surface and sand well, so that it is smooth and clean. Apply a coat of primer suitable for the specific type of surface and then apply a coat of PRIMER 900. After 6 hours at 20°C, proceed with the application of Klondike®.
  • New iron (without preparation): remove all grease and any layers of rust from the surface and apply a coat (or more) of a suitable anti-rust treatment product. When this is completely dry, apply a coat of PRIMER 900 and after 6 hours at 20°C, proceed with the application of Klondike®.

Note: When the substrate is plasterboard, the surface must be troweled in its entirety and not just at its joints and screws. It must then be primed with a suitable plasterboard primer and then follow the above preparation procedure.

 

Application

To create the colours shown in the catalogue, carefully mix Klondike® with the exact quantity of COLORI pigment. To create the gold or silver effect, you should add GOLD G 100 or SILVER G 200 to the coloured Klondike® product.

  • Classic effect (with trowel): apply Klondike® with the PV43 stainless steel trowel, using uneven strokes of 15-30 cm in all directions, leaving a light and uneven coating of the product on the surface. After 5 – 6 hours at 20°C, apply a second coat of Klondike® using the same method as the first coat (described previously). After about 30 minutes at 20°C, “work” by applying light pressure, using the PV43 stainless steel spatula, but without product, with crisscross (X) movements of about 15 – 20 cm in all directions so that the color particles break into smaller ones, thus forming light and shadow reflections.
  • Classic effect (Brush + Spatula): the classic effect can also be achieved using the following application cycle. Dip the Klondike-PV 76 brush in the product, making sure it is well loaded, and apply Klondike® using short strokes of 8-15 cm in all directions, with a movement from right to left and vice versa and from bottom to top and vice versa, leaving a light layer of product, which is unevenly distributed. After about 20 minutes at 20°C, use the PV43 stainless steel spatula (without product) to smooth the decorated surface, moving in all directions. After about 5 – 6 hours at 20°C, apply a second coat of Klondike®, using the same technique as for the first coat. After about 1 hour at 20°C, “work” by applying light pressure, using the PV43 stainless steel spatula, but without product, with crisscross (X) movements of about 15 – 20 cm in all directions so that the paint particles break into smaller ones, thus forming light and shadow reflections.
  • Brush effect: dip the Klondike-PV 76 brush into the product, making sure it is well loaded, and apply Klondike® using short strokes of 8-15 cm in all directions, moving from right to left and vice versa, and from bottom to top and vice versa, leaving a light layer of the product that is unevenly distributed. After 5 – 6 hours at 20°C, apply a second layer of Klondike®, using the same technique as for the first layer. After about 1 hour at 20°C, “work” by applying light pressure, using the Klondike brush, but without product, with crisscross (X) movements of about 15 – 20 cm in all directions so that the color particles break into smaller ones, thus forming light and shadow reflections.

Complementary products

You may also like