Interkas_Absolut_Matt_250ml

Absolut Matt Emulsion

High opacity and low odor, water-based matte finish for walls and ceilings

The deep matte slightly washable finish of Absolut Matt Emulsion is ideally suited to bedrooms, living rooms, dining rooms and other low-traffic areas.

Interkas_Absolut_Matt_250ml
Woad 251, Grey Stone 276, Sunlight 135 - Detail
Welcome - Dark 181
Ultra Blue 264
Ultra Blue 264-Linen Wash

Absolut Matt Emulsion

High opacity and low odor, water-based matte finish for walls and ceilings

The deep matte slightly washable finish of Absolut Matt Emulsion is ideally suited to bedrooms, living rooms, dining rooms and other low-traffic areas.

Δείτε το χρωματολόγιο εδώ

Δείτε το χρωματολόγιο Colour Scales

Δείτε το χρωματολόγιο Stone

Δείτε το χρωματολόγιο Grey

Δείτε το χρωματολόγιο Sweet Treats

250ml

Absolut Matt Emulsion paint is used on walls and ceilings, offering a deep matte, slightly washable finish, ideally suited to bedrooms, living rooms, dining rooms and other low-traffic areas.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Brush, Roller, Paint Gun

Cleaning
tools

Water

Drying between coats

1-4 h

Back in
service

12 h

Number of
layers

2
BENEFITS
  • Microporous
  • Child-friendly (Toy Safety Certification BS EN71-3:2019)
  • Manufactured under the auspices of the environmental quality management systems ISO 9001:2015 & ISO 14001:2015
  • A+ Product
  • Washing/Abrasion Resistance – DIN EN 13 300

 

 

A+_EMISSION
child safe_logo
A+_EMISSION
child safe_logo
INFORMATION

Absolut Matt Emulsion microporous paint offers a deep matte, slightly washable finish, ideal for bedrooms, living rooms, dining rooms and other low traffic areas. It is very child-friendly, has an A+ rating and has a satisfactory wash response.

Preparation

  • General: Remove any surface imperfections and repair any defects to ensure a top quality finish.
  • Existing painted surface: Remove all loose and flaking paint. Degrease with a suitable detergent solution then rinse with clean water. Sand thoroughly with medium grit sandpaper, e.g. 120-150, to create a smooth, defect-free surface, focusing more on areas where paint has been removed. Make repairs, sand and where necessary apply Little Greene Intelligent ASP Primer to the exposed surface.
  • New plastered walls: For newly plastered surfaces, allow at least four weeks for the plaster to dry thoroughly. Apply one coat of Absolut Matt Emulsion as a primer diluted 5 to 25% (by volume) with water, depending on the porosity of the substrate. Apply by brush and roller to the entire surface and allow to dry. Finish by applying two full coats of Absolut Matt Emulsion.
  • Existing painted plasterboard walls: Lightly wash any existing paint to remove any dust or surface stains. Apply one coat of Intelligent Absolut Matt Primer, thinned with 5 to 25% (by volume) water, depending on the porosity of the substrate. Finish by applying a minimum of two full coats of Absolut Matt Emulsion.

Note: For a significant change in colour scheme, it is strongly recommended to apply a first coat of Little Greene Intelligent ASP Multi-Surface Primer. This product is suitable for painting over lime-based substrates or other natural plasters, provided that the walls do not suffer from moisture problems and compatibility with the existing coating has been ensured.

 

Application

  • Stir well before use.
  • Do not apply to surfaces when the ambient temperature is below 8°C.
  • Brushing: Always use high-quality synthetic bristle brushes that are the right size for the job. Apply Absolut Matt Emulsion paint in even strokes and only extend the paint area so that a wet edge is easily maintained. For a higher quality final finish, apply final strokes in the same direction and do not re-apply where the paint has already started to dry. For intricate objects or when high ambient temperatures/or high airflow conditions cannot be avoided, the workability time can be extended by adding 10 to 15% (by volume) water.
  • Roller: Use a short-pile fur paint roller for best results on smooth surfaces. Increase the size of the roller pile when there are rougher surfaces. Keep all final roller strokes always in the same direction, maintaining a wet edge throughout and do not re-roll over areas where Absolut Matt Emulsion has already started to dry as there is a serious risk of streaking. When high ambient temperatures/or high air flow conditions cannot be avoided, the workability time can be extended by adding 10 to 15% (by volume) water.

Complementary products

Interkas_Intelligent_Wall_Primer_Sealer_2.5L

Wall Primer Sealer

Microporous, waterproofing and stabilizing wall primer with high opacity and low odor

You may also like

Interkas_Intelligent_Matt_2.5L

Intelligent Matt Emulsion

High quality, low odor, matte finish reinforced wall paint

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN