Interkas_FILL_FINISH_1KG

Aguaplast Fill & Finish

Repair and finishing powder putty for interior use

For troweling and finishing absorbent substrates.

Interkas_FILL_FINISH_1KG

Aguaplast Fill & Finish

Repair and finishing powder putty for interior use

For troweling and finishing absorbent substrates.

COLORS

White
White

1,0Kg

The Aguaplast Fill & Finish repair and finishing powder putty for interior use is used for filling holes and cracks as well as for troweling and finishing absorbent substrates such as plaster, gypsum boards, concrete, cement blocks, bricks, etc…

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Stocker, Spatula

Cleaning
tools

Water

Drying between coats

1 h

Back in
service

3-4 h

Number of
layers

1-2
BENEFITS
  • Gypsum-based powder filler
  • Filling capacity up to 30 mm
  • Easy and smooth mixing and sanding
  • Provides a white fine finish
  • A+ product
A+_EMISSION
A+_EMISSION
INFORMATION

The Aguaplast Fill & Finish repair and finishing powder putty for interior use is used for filling holes and cracks as well as for troweling and finishing absorbent substrates such as plaster, gypsum boards, concrete, cement blocks, bricks, etc. It has a filling capacity of up to 30 mm and offers a very white and fine finish.

Preparation

  • Apply to dry substrates.
  • The substrate must be cohesive, stable and free from dust, grease, wax or any other substance that prevents the proper adhesion of the putty. Remove loose or poorly adhered parts of plaster, mortar, old paint layers, etc. Apply DELTAFIX or another stabilizing primer to stabilize weak and chalky substrates. If necessary, treat absorbent substrates with FIXACRYL or another stabilizing primer to reduce surface absorption.
  • All areas contaminated with mold and/or moss must be thoroughly cleaned and then treated with FUNGISTOP or another antifungal agent.
  • Protect metal parts with Beissier CHAMELEON or another anti-corrosion primer.
  • Repair and seal dynamic cracks with AGUAPLAST FIBRA or FLEX FILL.
  • In general, substrates must be treated and prepared in accordance with local standards. If in doubt, it is highly recommended to carry out a test application on a small area to determine suitability, compatibility and application conditions.
  • Do not apply to substrates subject to constant humidity.
  • Do not apply to polished surfaces (tiles, mosaics, etc.).

 

Application

  • Use clean water, container and tools to mix the product.
  • Mix in a ratio of 0.5 L water / 1 kg powder. Gradually pour the powder into water, stirring until a homogeneous paste without lumps is obtained. The product can be used immediately. The paste remains workable for approximately 1 hour at 20ºC. High temperatures will reduce and low temperatures may extend the working time. Do not re-stir the mixture. Do not add water or powder once the product has started to set. Do not add excessive water to avoid shrinkage.
  • Apply using a stainless steel trowel, spatula or blade.
  • Clean tools with water immediately after use.
  • When working indoors, allow ventilation to ensure proper drying.
  • Can be overcoated with any type of paint, topcoat, wallpaper, etc.
  • Decorative finishes can be applied once the surface is dry.

Complementary products

Interkas_FLEX_FILL_1Kg

Aguaplast Flex Fill

External use elastomeric fiber-reinforced putty

Interkas_FIBRA-0,75

Aguaplast Fibra

Fiber-reinforced elastic putty

You may also like

Interkas_TOP_FINISH_1KG

Aguaplast Top Finish – Bio based

Ready-made fine-grained acrylic biologically synthesized putty

Interkas_INSTANT-200ml

Aguaplast Instant

Ready-made quick-drying acrylic putty

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN