Interkas_AGUAPACK_24H

Aguaplack easy joint 24h

Powdered putty for filling and finishing joints – 24 Hours

Use in plasterboards for filling and finishing joints.

Interkas_AGUAPACK_24H

Aguaplack easy joint 24h

Powdered putty for filling and finishing joints – 24 Hours

Use in plasterboards for filling and finishing joints.

COLORS

Λευκό
Λευκό

20,0Kg

Aguaplack easy joint 24h is a slow-drying traditional gypsum-based powder putty for filling and finishing joints in plasterboard, filling corner caps and screw heads and can be used to repair small holes and cracks in plaster or plasterboard. Finally, it is suitable for achieving all Quality Levels Q1 to Q4, from joint filling to final puttying with the highest quality standards.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On Request) HERE

Tools

Spatula, Large spatula (blade)

Cleaning
tools

Water

Drying between coats

24 h

Back in
service

24 h

Number of
layers

2
BENEFITS
  • 24-hour setting composition
  • Fine granulometry for perfect joint finishing, with excellent hardness and cohesion properties
  • It is suitable for the immediate application of any type of coating: paints, wallpaper, high decoration products, decorative fiber mesh (and its corresponding coating plasters), etc.
  • Low density: high yield per m² of plasterboard Ideal product for large surfaces and extensive constructions
  • Maintains stable working consistency for 24 hours and can be applied mechanically with “bazooka” type machines for joint application
  • A+ product
INFORMATION

Aguaplack easy joint 24h is a slow-drying traditional gypsum-based powder putty for filling and finishing joints in plasterboard, filling corner caps and screw heads and can be used to repair small holes and cracks in plaster or plasterboard. Finally, it is suitable for achieving all Quality Levels Q1 to Q4, from joint filling to final puttying with the highest quality standards.

Preparation

 

  • The substrate must be dry, cohesive, stable and free from dust, grease, wax or any other substance that prevents the proper adhesion of the putty.
  • Remove dust from the joints. Use clean water, container and tools to mix the product. Add 2 parts powder to 1 part water (20 Kg powder – approximately 10 L water). Mix vigorously, preferably with an electric mixer, to create a uniform paste. Wait 5 minutes before use. The powder-water ratio can be adjusted according to the required consistency.
  • The paste remains workable for approximately 2 hours at 20°C.
  • High temperatures may reduce and low temperatures may extend the working time.
  • Do not stir once the setting process has started.
  • Do not add water or powder once the setting process has started. Do not add too much water to avoid shrinkage.

 

Application

 

  • Fill the joint and centre the tape over the joint, then position it by pressing down with a spatula and coat immediately.
  • Apply the 2nd coat extending 3 to 5 cm from each side of the joint.
  • Allow for ventilation to ensure proper drying.
  • Sand only when the joint is thoroughly dry.
  • Once the surface is dry, apply Beissier Drywall Primer to prepare for painting or Beissier FIXACRYL to prepare for wall coverings.
  • In general, substrates must be treated and prepared in accordance with local standards. In case of doubt, it is highly recommended to carry out a test application on a small area to determine suitability, compatibility and application conditions

Complementary products

Interkas_PRYMER_ACQ

Prymer ACQ

Concentrated water-based acrylic homogenizing and stabilizing primer

Interkas_DRYWALL_PRIMER_4L

Aguaplast Dry Wall Primer

White water-based primer, ideal for plasterboards, spatulated surfaces and on walls

You may also like

Interkas_UNIVERSAL_PRO_5KG

Aguaplast Universal Pro

Professional lightweight multi-purpose powder putty

Interkas_AGUAPACK_TOPJOINT_2H

Aguaplack top joint 2h

Gypsum-based powder putty for filling and finishing joints – 2 Hours

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN