Klondike Corten Mid

Covering and Decorative coating-paint, characterized by the “Corten” effect

It accurately reproduces the well-known rust effect of oxidized “Corten” Steel, with its characteristics.

Klondike Corten Mid

Covering and Decorative coating-paint, characterized by the “Corten” effect

It accurately reproduces the well-known rust effect of oxidized “Corten” Steel, with its characteristics.

DOWNLOAD THE COLOR CHART HERE

1,0L – 2,5L – 5,0L

Klondike Corten Mid is a coating for exterior and interior spaces characterized by the Corten effect, which accurately reproduces the well-known original rust effect with the distinct oxidations of the steel.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

DOWNLOAD THE VIDEO Klondike Corten HERE

Tools

Brush PV09, Stainless steel spatula PV 43

Cleaning
tools

Water

Drying between coats

3 -4 h

Back in
service

24 h

Number of
layers

Creates a breathable film
Siloxane composition
Excellent resistance to abrasion, water and bad weather conditions

Klondike Corten Mid is a decorative and protective coating-paint, characterized by the “Corten” effect. Once Klondike Corten Mid has fully hardened, it creates a breathable film that has excellent resistance to abrasion, washing, bad weather conditions and atmospheric pollution. Once dry, surfaces coated with Klondike Corten Mid can withstand both high (+50°C) and low (-40°C) temperatures.

Preparation

Smooth surface: Remove all old, loose and flaking paint and clean. If necessary, scrape the surface. Then, apply a stabilizing primer depending on the type of surface, especially if the substrate is lime-based. On metal substrates, the metal must be thoroughly cleaned and then the surface must be primed with a suitable metal primer. When the primer is completely dry, apply a coat of Primer 1200 and after 6 hours at 20°C, proceed with the application of Klondike Corten Mid.
Raw or unprepared surface: Clean (and if necessary, fill/fill) the surface you want to paint. Once dry, sand and apply a coat of a suitable primer. Then apply a layer of KLONDIKE RASANTE R7 using a stainless steel spatula to make the surface as smooth as possible. KLONDIKE RASANTE R7 also acts as a primer, so after 12 hours at 20°C, proceed with the application of Klondike Corten Mid.

Application

“Spatula” effect: Apply a layer of Klondike Corten Mid, with the PV 43 stainless steel spatula, working with small continuous strokes in all directions, leaving a product thickness of approximately 1 mm. Coverage: 1 liter for approximately 2 – 3 m2 for one layer on a smooth substrate.
“Natural Cast” effect: Apply a layer of Klondike Corten Mid with the narrow side of the PV09 brush or the Art. 128 brush, in a direction from top to bottom and vice versa, intentionally leaving irregular lines as long as possible, from 1 mm to 2 cm wide, with a thickness of 1 – 2 mm, on the entire substrate to be decorated. After 15 – 20 minutes (at a temperature of 20°C), apply the 2nd layer, but this time using the PV 43 stainless steel spatula and spreading the material vertically, from top to bottom and vice versa, leaving a layer of product of approximately 1 mm. Finally, smooth (with light pressure) the substrate with a vertical movement, taking care not to remove the Klondike Corten Mid. It is important to apply with the “wet on wet” process, so that it does not dry out, especially at the joints. Coverage : 1 liter for approximately 1.5 – 2.0 m2 for two layers on a smooth substrate.

Interior use

Exterior use

Varnishes - Impregnation products for outdoor use

Varnishes - Wood finishing products for interior use

Wood Floors & Flooring

Artists & DIY paintings - Chalk Paints

Decoration products & Coatings

Decoration tools

Fillers & Smoothing compounds

Bio based & ECO

Klondike Corten Mid

Covering and Decorative coating-paint, characterized by the “Corten” effect

It accurately reproduces the well-known rust effect of oxidized “Corten” Steel, with its characteristics.

Klondike Corten Mid

Covering and Decorative coating-paint, characterized by the “Corten” effect

It accurately reproduces the well-known rust effect of oxidized “Corten” Steel, with its characteristics.

DOWNLOAD THE COLOR CHART HERE

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

DOWNLOAD THE VIDEO Klondike Corten HERE

Tools

Cleaning
tools

Drying between coats

Back in
service

Number of
layers

Complementary products

Spatula Inox PV44

High quality stainless steel lightweight spatula for Valpaint techniques

Paint Brush – Penello PV09

30X100 mm paintbrush with a combination of natural and synthetic bristles for use with Valpaint style paints

Primer 1200

White water-based primer for the preparation of decorative paints

You may also like

Klondike®

Decorative paint with aged metallic effect

Klondike Light

Decorative paint with aged effect in a wide range of shades

Klondike Corten Top

Covering and Decorative coating-paint, characterized by the “Corten” effect

Companies

Klondike Corten Mid

Covering and Decorative coating-paint, characterized by the “Corten” effect

It accurately reproduces the well-known rust effect of oxidized “Corten” Steel, with its characteristics.

Klondike Corten Mid

Covering and Decorative coating-paint, characterized by the “Corten” effect

It accurately reproduces the well-known rust effect of oxidized “Corten” Steel, with its characteristics.

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Cleaning tools

Drying between coats

Back in service

Number of layers

Complementary products

High quality stainless steel lightweight spatula for Valpaint techniques

30X100 mm paintbrush with a combination of natural and synthetic bristles for use with Valpaint style paints

White water-based primer for the preparation of decorative paints

You may also like

Decorative paint with aged metallic effect

Decorative paint with aged effect in a wide range of shades

Covering and Decorative coating-paint, characterized by the “Corten” effect

Companies

Ρυθμίσεις Απορρήτου

Παρακάτω μπορείτε να ενεργοποιήσετε ή απενεργοποιήσετε τους διαφορετικούς τύπους cookies:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Cleaning
tools

Back in
service

Number of
layers