Vernis Antirouille

Anti-rust metal varnish for interior and exterior use

Vernis Antirouille metal varnish effectively protects all ferrous metals indoors and outdoors.

Vernis Antirouille

Anti-rust metal varnish for interior and exterior use

Vernis Antirouille metal varnish effectively protects all ferrous metals indoors and outdoors.

In Satin, Glossy and Matte 0.25L – 0.5L

The anti-rust metal varnish Vernis Antirouille acts as a protector against UV radiation and bad weather conditions, and protects external ferrous metals and objects (garden furniture, barbecues, floor lamps, metal fittings …) as well as internal ones (small iron art structures and utilitarian metal objects …).

Tools

Roller, brush

Cleaning
tools

Water

Drying between coats

4 h

Back in
service

24 h

Number of
layers

2
BENEFITS
  • Colorless Satin, Glossy & Matt: does not distort the original appearance of the substrate, does not yellow
  • Resistant to ultraviolet radiation, weather conditions and impacts
  • Optimal waterproofing: creates a barrier against water
  • Anti-corrosion action: protects against rust
INFORMATION

Vernis Antirouille is a rust-proof metal varnish that prevents the effects of UV rays and bad weather on ferrous metals. It effectively protects all ferrous metals outdoors (garden furniture, grilles, lamp posts, accessories) and indoors (small artistic and everyday ironworks). Its transparent, colorless film discreetly highlights metals while maintaining their original appearance (raw, patinated or rusty).

Preparation

  • On new metal surfaces: perfect adhesion on clean surfaces, dry and free from grease, corrosion or scale. With a wire brush, remove loose rust spots and any areas of heavy corrosion. Degrease with acetone. Clean thoroughly.
  • On new galvanized metal: leave to cure for 6 months.
  • On old or oxidized metals: remove loose rust spots with a wire brush. Degrease with acetone. Clean thoroughly.
  • On painted metal surfaces: use Décapant Gel Multi-Supports – Syntilor paint stripper to remove the paint. Then degrease with acetone.

NOTE: Vernis Antirouille metal varnish should not be used on metals intended for use with food (dishes and cookware, etc.) or on metals heated above 35 ° C (heating stoves, etc.). Do not apply over rust converter, nor on metals polished with a special polish without carefully degreasing the metal after polishing. Do not use for purposes other than those for which it is intended.

 

Application

  • Do not dilute, ready to use.
  • Apply Vernis Antirouille Syntilor metal varnish with a brush, wide brush or roller in 2 coats.
  • Let dry 4 hours between coats. Do not let 48 hours pass between coats.
  • Quick drying and hardening, however take some precautions during the first few days.