Degriseur Nettoyant

Degriseur Nettoyant eliminates graying on all exterior woods

Cleans, degreases and eliminates graying of all exterior wood.

Degriseur Nettoyant

Degriseur Nettoyant eliminates graying on all exterior woods

Cleans, degreases and eliminates graying of all exterior wood.

1,0L

Ideal for cleaning exterior wooden structures that have been damaged by weather conditions. The gel formulation ensures a fast and penetrating action, which eliminates graying and stains without damaging the wood.

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Roller, hard brush

Cleaning
tools

Water

Drying between coats

Back in
service

48 h

Number of
layers

1-2
BENEFITS
  • For all exterior woods
  • Brightens and revitalizes without discoloring
  • Eliminates graying, stains and dirt
INFORMATION

With its new highly concentrated formula and rich in active ingredients, Degriseur Nettoyant thoroughly cleans and degreases all exterior wooden surfaces (terraces, cladding, sheds, garden furniture, etc.) that have been attacked by bad weather and sunlight.

Its gel formula ensures a fast and penetrating action that eliminates greying, stains and dirt without altering or discoloring the wood.

Suitable for all types of wood: European (hard, resinous or soft), exotic, pre-impregnated.

Preparation

  • Application on raw wood without any finish (oil, varnish, impregnation varnish…): if necessary, sand with sandpaper No. 40, 60 and 100 to restore the wood or use the corrosive Décapant Gel Multi-Supports Syntilor.
  • In order to optimize the action of the product, it is recommended to wet the wood before application, to open the pores.

 

Application

  • Ready to use product, do not dilute.
  • Shake well before use.
  • Gloves, goggles and protective clothing are recommended.
  • Apply Dégriseur Nettoyant with a brush, stiff brush or roller (long bristles), in the direction of the wood fibres. In the case of vertical surfaces, work from top to bottom.
  • Leave to act for a maximum of 10 to 15 minutes. Rub if necessary with a nylon brush (stiff bristles) to perfect the action of the product (caution: risk of splashing).
  • For immediate and rapid results, work on areas of 5 to 10 m² maximum each time.
  • Rinse with plenty of water.
  • If necessary, make a second application, under the same conditions.
  • Allow to dry for 48 hours before applying your chosen finish.
  • Please note that the final color of the wood will only appear after the finish has been applied.

Complementary products

You may also like