Interkas_LITE_FILL_0,75L
Interkas_LITE_FILL_4L

Aguaplast Lite Fill

Lightweight powder putty

Fills holes and cracks without any thickness limit on interior and exterior surfaces.

Interkas_LITE_FILL_0,75L
Interkas_LITE_FILL_4L

Aguaplast Lite Fill

Lightweight powder putty

Fills holes and cracks without any thickness limit on interior and exterior surfaces.

COLORS

White
White

0,25L – 0,75L – 4,0L

Aguaplast Lite Fill is Beissier’s lightweight powder putty, which fills holes and cracks of any width or depth in interior and exterior walls with a single layer. It complements and fills skirting and wall joints. It does not shrink or crack even in thick layers. It dries quickly and does not require a primer for its application.

 

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Stocker, Spatula

Cleaning
tools

Water

Drying between coats

2-24 h

Back in
service

After complete drying

Number of
layers

1
BENEFITS
  • One-coat filling
  • Does not shrink or crack even in thick layers
  • Excellent adhesion
  • Dries quickly
  • No primer required for application No sanding required
  • A+ product
  • Recycled & 100% recyclable packaging
A+_EMISSION
Recycle pack copy
A+_EMISSION
Recycle pack copy
INFORMATION

Aguaplast Lite Fill is Beissier’s lightweight powder putty, which fills holes and cracks of any width or depth in one layer on interior and exterior walls. It complements and fills skirting and wall joints. It is an ideal product for filling large holes in ceilings and roofs as well as for repairing plaster, polystyrene and wood castings. It does not shrink or crack even in thick layers. It dries quickly and does not require a primer for its coating.

Preparation

  • Apply to dry substrates.
  • The substrate must be cohesive, stable and free from dust, grease, wax or any other substance that prevents the proper adhesion of the lightweight putty. Remove loose or poorly adhered parts of plaster, mortar, old paint layers, etc.
  • Apply DELTAFIX or another stabilizing primer to stabilize weak and chalky substrates. If necessary, treat absorbent substrates with FIXACRYL or another stabilizing primer to reduce surface absorption.
  • All areas contaminated with mold and/or moss must be thoroughly cleaned and then treated with FUNGISTOP or another antifungal agent.
  • Protect metal parts with Beissier CHAMELEON or another anti-corrosion primer.
  • In general, substrates should be treated and prepared in accordance with local standards. If in doubt, it is highly recommended to perform a test application on a small area to determine suitability, compatibility and application conditions.

 

Application

  • Ready to use lightweight putty paste.
  • Apply using a stainless steel trowel or spatula.
  • Clean tools with water immediately after use. When working indoors, allow for ventilation to ensure proper drying.
  • Can be overcoated with any type of paint, topcoat, wallpaper, etc.
  • Decorative finishes can be applied once the surface is dry.

Complementary products

Interkas_CHAMELEON_0,75L

Chameleon

Multi-purpose and surface primer, final finish and stain cover

You may also like

Interkas_FIBRA-0,75

Aguaplast Fibra

Fiber-reinforced elastic putty

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN