Interkas_EXTERIOR_1,5KG

Aguaplast Exterior

White repair putty for exterior use

Cement-based filling putty for exterior use.

Interkas_EXTERIOR_1,5KG

Aguaplast Exterior

White repair putty for exterior use

Cement-based filling putty for exterior use.

COLORS

Λευκό
Λευκό

1,5Kg

Aguaplast Exterior exterior repair putty is used for filling and leveling masonry substrates such as concrete, fine-grained concrete, cellular concrete, cement block, cement, brick, etc. It is also suitable for wet substrates.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Spatula, Large spatula, Stocker

Cleaning
tools

Water

Drying between coats

2 h

Back in
service

24 h

Number of
layers

1-2
BENEFITS
  • It is a cement-based filler for exterior use
  • Very easy to use
  • Has a long workability time
  • Can be overcoated after 48 hours
  • Provides a thin white hard surface
A+_EMISSION
A+_EMISSION
INFORMATION

Aguaplast Exterior exterior repair putty is used for filling and leveling masonry substrates. It is cement-based and has a long workability time. It fills holes and cracks up to 5 mm.

Preparation

  • The substrate must be cohesive, stable and free from dust, grease, wax or any other substance that prevents the proper adhesion of Aguaplast Exterior exterior repair putty.
  • Remove loose or poorly bonded parts. Apply DELTAFIX or another stabilizing primer to stabilize weak and chalky substrates. If necessary, treat absorbent substrates with FIXACRYL or another stabilizing primer to reduce surface absorption.
  • All areas contaminated with mold and/or moss must be thoroughly cleaned and then treated with FUNGISTOP or another antifungal agent. Protect metal parts with Beissier CHAMELEON or another anti-corrosion primer.
  • Repair and seal dynamic cracks with AGUAPLAST FIBRA or FLEX FILL.
  • In general, substrates must be treated and prepared in accordance with local standards. If in doubt, it is highly recommended to carry out a test application on a small area to determine suitability, compatibility and application conditions.
  • Do not apply to polished surfaces (tiles, mosaic, etc.).
  • Do not apply to gypsum-based substrates (plaster, drywall, blockwork, etc.).

 

Application

  • Use clean water, a container and tools to mix Aguaplast Exterior exterior repair putty.
  • Mix in a ratio of 0.3 L water / 1 kg powder. Gradually pour the powder into water, stirring until a homogeneous paste without lumps is obtained. The product can be used immediately. The paste remains workable for approximately 2 hours at 20ºC. High temperatures will reduce and low temperatures may extend the working time. Do not re-mix the mixture. Do not add water or powder once the product has started to set. Do not add excessive water to avoid shrinkage. Do not add water or powder once the product has started to set.
  • Clean tools with water immediately after use.
  • When working indoors, leave ventilation to ensure proper drying.
  • Can be overcoated with any type of paint, topcoat, wallpaper, etc.
  • Decorative finishes can be applied once the surface is dry.

Complementary products

Interkas_FLEX_FILL_1Kg

Aguaplast Flex Fill

External use elastomeric fiber-reinforced putty

Interkas_FIBRA-0,75

Aguaplast Fibra

Fiber-reinforced elastic putty

You may also like

Interkas_UNIVERSAL_FACADE_10L

Universal Facade

Professional lightweight ready-to-use putty for exterior applications

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN