Chameleon Spray

Multi-purpose and surface primer in spray

Primer in spray with excellent adhesion for many different substrates: metal surfaces, plastic, ceramics, wood and timber, glass, etc.

Chameleon Spray

Multi-purpose and surface primer in spray

Primer in spray with excellent adhesion for many different substrates: metal surfaces, plastic, ceramics, wood and timber, glass, etc.

COLORS

White

Spray 400ml

Chameleon multi-purpose spray primer is used on many different surfaces such as: metal surfaces (iron, zinc, galvanized iron, aluminum, lead, brass, copper…), plastics, rigid PVC, polyester, fiberglass, methacrylate, melamine, expanded polyurethane, ceramics, mosaic, glass, wood, etc. It has excellent adhesion to most types of substrates.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Spray

Cleaning
tools

WS or General Purpose Solvent

Drying between coats

2 h

Back in
service

2 - 36 h, depending on the coating

Number of
layers

1-2

Excellent adhesion to most substrates: metal surfaces, plastic, ceramics, wood and timber, etc.
Self-leveling
Fast drying, dry to the touch in 30 minutes
Anti-corrosion protection for metal surfaces
Heat resistant up to 100°C
Can be coated with any water-based or solvent-based paint (synthetic enamels, polyurethane, epoxy…), except nitrocellulose paints
Color: White
Lead and chrome-free
Advantages of the special valve: Paint saving, time reduction and improved ergonomics thanks to the adjustable nozzle

Chameleon Multipurpose Spray Primer has excellent adhesion to most types of substrates. It acts as a primer and final finishing coat for metal surfaces (iron, zinc, galvanized iron, aluminum, lead, brass, copper…), plastics, rigid PVC, polyester, fiberglass, methacrylate, melamine, expanded polyurethane, ceramics, mosaic, glass, etc. It contains a rust inhibitor (DIN 53.167: no rust formation on metal surfaces after 150 hours under aggressive salt solution) so that it can be used safely on many different metal surfaces. It can be coated with any water-based or solvent-based paint (synthetic enamels, polyurethane, epoxy…), except nitrocellulose paints.

Preparation

Apply to clean, dry and sound substrates. Remove loose material and all traces of rust, scale, grease or wax from the substrate.
Iron & Steel: To ensure good corrosion protection, substrates should be abraded, cleaned and allowed to dry. All areas of corrosion should be removed and cleaned with BEISSIER MINOXIL (phosphoric acid based) or other suitable cleaner. Apply 2 coats of Beissier Chameleon Spray.
Zinc and galvanized iron: Clean thoroughly with BEISSIER MINOXIL and sand gently with fine sandpaper. A preliminary adhesion test is recommended due to the wide variety of galvanized surfaces. Apply 2 coats of Beissier Chameleon Spray.
Aluminum, Copper & Brass: Clean with MINOXIL. Not recommended for application to anodized & clean aluminum. Preliminary adhesion test recommended.
PVC & Hard Plastics: Clean thoroughly with ammonia. Sand gently with fine sandpaper.
Wood & Timber: The substrate must be dry and protected from wood-eating insects. Any wood rot must be removed and treated.
When using Chameleon Spray as a primer for further coating materials, these must be applied within 3 days. Longer waiting time would require light sanding to promote adhesion of the finishing coatings.
Do not apply at relative humidity greater than 85%.
Do not use on surfaces exposed to static or capillary moisture.

Application

Shake the can well for 3 minutes. Adjust the adjustable nozzle and apply 2 coats evenly.
After use, invert the spray can and press for a few seconds to clean the valve.
Recommended final layer thickness: 100 microns.
Theoretical yield: approximately 2 m2/ 400 ml and per coat, depending on the type of substrate.
Cleaning of tools: With WS or General purpose solvent

Interior use

Exterior use

Varnishes - Impregnation products for outdoor use

Varnishes - Wood finishing products for interior use

Wood Floors & Flooring

Artists & DIY paintings - Chalk Paints

Decoration products & Coatings

Decoration tools

Fillers & Smoothing compounds

Bio based & ECO

Chameleon Spray

Multi-purpose and surface primer in spray

Primer in spray with excellent adhesion for many different substrates: metal surfaces, plastic, ceramics, wood and timber, glass, etc.

Chameleon Spray

Multi-purpose and surface primer in spray

Primer in spray with excellent adhesion for many different substrates: metal surfaces, plastic, ceramics, wood and timber, glass, etc.

COLORS

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Cleaning
tools

Drying between coats

Back in
service

Number of
layers

You may also like

Chameleon

Multi-purpose and surface primer, final finish and stain cover

Companies

Chameleon Spray

Multi-purpose and surface primer in spray

Primer in spray with excellent adhesion for many different substrates: metal surfaces, plastic, ceramics, wood and timber, glass, etc.

Chameleon Spray

Multi-purpose and surface primer in spray

Primer in spray with excellent adhesion for many different substrates: metal surfaces, plastic, ceramics, wood and timber, glass, etc.

COLORS

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Cleaning tools

Drying between coats

Back in service

Number of layers

You may also like

Multi-purpose and surface primer, final finish and stain cover

Companies

Ρυθμίσεις Απορρήτου

Παρακάτω μπορείτε να ενεργοποιήσετε ή απενεργοποιήσετε τους διαφορετικούς τύπους cookies:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Cleaning
tools

Back in
service

Number of
layers