Interkas_Intelligent_Gloss_1L

Intelligent Gloss

High quality, self-priming, low-odor, water-based, high-gloss enamel finish, with excellent durability.

Its excellent durability makes this product particularly suitable for painting decorations, kitchen furniture, as well as kitchen and bathroom walls.

Interkas_Intelligent_Gloss_1L
Linen Wash 33 copy
Route One 254, Air Force Blue 260, Slaked Lime Deep 150 copy
Confetti 274, Livid 263 - 1 copy

Intelligent Gloss

High quality, self-priming, low-odor, water-based, high-gloss enamel finish, with excellent durability.

Its excellent durability makes this product particularly suitable for painting decorations, kitchen furniture, as well as kitchen and bathroom walls.

1,0L

The high-quality, self-priming and low-odor Intelligent Gloss water-based gloss enamel has excellent resistance to washing, abrasion and wear, stains and contact with different chemical agents. The excellent water resistance and very good adhesion characteristics make this product particularly suitable for painting decorations, kitchen furniture as well as kitchen and bathroom walls.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Brush, Roller, Paint Gun

Cleaning
tools

Water

Drying between coats

2-6 h

Back in
service

12 h

Number of
layers

2-3
BENEFITS
  • Child-friendly (Toy Safety Certification BS EN71-3:2019)
  • Manufactured under the auspices of the ISO 9001:2015 & ISO 14001:2015 environmental management systems
  • A+ Product
  • Washing/Abrasion Resistance – DIN EN 13 300 – Category 1
  • New improved Intelligent Grip™ formula
  • High gloss finish >87% gloss, higher than traditional alkyd finishes
A+_EMISSION
Intelligent_Grip copy
image
A+_EMISSION
Intelligent_Grip copy
image
INFORMATION

Intelligent Gloss water-based enamel is now enhanced with cutting-edge Intelligent Grip™ technology. This new development brings primer technology to the topcoat, without compromising on finish and without the need for a separate primer. Transform your kitchen or bathroom cabinets, radiators, and hard-to-reach walls or doors with just one can of paint, minimizing the need for expensive preparation, extra costs, packaging, and paint residue. Intelligent Gloss enamel is especially recommended for finishing wood surfaces and is suitable for both interior and exterior use.

Preparation

  • General: Remove any surface imperfections and repair any defects to ensure a top-notch finish.
  • New wood: Unpreserved softwood timber should be treated with a suitable wood preservative.
    • In softwoods, knots should be sealed with a suitable product to prevent moisture from seeping into the finished surface. Resinous hardwoods require cleaning.
    • Ensure the moisture content of the timber is below 15% before commencing application. Damp wood should never be painted as this can cause blistering, peeling, cracking and premature coating failure.
    • Green oak should not be painted unless it has been exposed to the outside and dried for at least 6 months.
  • Metals: New ferrous/non-ferrous metals should be cleaned by hand or mechanically to remove any surface rust prior to application. Bare or corroded iron or steel will require 2 coats of Little Greene Intelligent ASP Primer.
  • Plastics: For long-term performance and durability, clean and abrade all surfaces thoroughly. For best results, apply one coat of Little Greene Intelligent ASP Multi-Surface Primer.
  • Existing Paint Finish: Remove all loose and flaking paint. Degrease with a suitable detergent solution, then rinse with clean water. Sand thoroughly with medium grit sandpaper, e.g. 120-150 grit to create a smooth, defect-free surface, focusing more on areas where paint has been removed. Make repairs, sand and prime with a first coat of Little Greene Intelligent Gloss diluted 5 to 25% (by volume) with water to all exposed and repaired surfaces. Follow with 2 coats of Little Greene Intelligent Gloss.
  • Old matt paints exposed to high humidity conditions may have degraded over time and should be primed with a coat of Little Greene Intelligent ASP diluted 5 to 25% (by volume) with water to ensure the surface is insulated and properly sealed.
  • New walls: For newly rendered surfaces, allow at least four weeks for the render to dry thoroughly. Apply a coat of Intelligent Gloss water based primer diluted 5 to 25% (by volume) with water, depending on the porosity of the substrate. Finish by applying two full coats of Intelligent Gloss. This product is not suitable for painting over lime-based or other natural render substrates.
  • Existing masonry: Lightly wash any existing paint to remove any dust or surface stains. Apply one coat of Intelligent Gloss water-based primer thinned with 5 to 25% (by volume) water, depending on the porosity of the substrate. Finish by applying at least two full coats of Intelligent Gloss as required. This product is not suitable for painting over lime-based or other natural render substrates.

 

Application

  • Stir well before use.
  • Do not apply to surfaces when the ambient temperature is below 8°C.
  • In addition, for exterior application, do not apply if there is a risk of rain or frost during application or the drying period.
  • Brushing: Always use high quality synthetic bristle brushes that are the right size for the job. Apply Intelligent Gloss Water Based Paint in even strokes and only extend the paint area so that a wet edge is easily maintained. For a higher quality final finish, apply final strokes in the same direction and do not re-apply over areas where the paint has already started to dry.
  • For complex objects or where high ambient temperatures/ or high air flow conditions cannot be avoided, the workability time can be extended by adding 10 to 15% (by volume) water.
  • Roller Painting: Use a medium pile fur paint roller for best appearance on smooth surfaces. Increase the length of the roller pile for rougher surfaces to ensure even and complete coverage. Keep all final roller strokes in the same direction, maintaining a wet edge throughout, and do not re-roll over areas where the Intelligent Gloss Water-Based Paint has already begun to dry as there is a serious risk of streaking.
  • For intricate objects or where high ambient temperatures/or high air flow conditions cannot be avoided, the pot life can be extended by adding 10 to 15% (by volume) water.
  • Light sanding between coats will remove any dust spots and other surface stains, creating an almost professional finish.

Complementary products

Interkas_Intelligent_ASP_2.5L

Intelligent ASP

High opacity and low odor water-based matte primer and undercoat

You may also like

Interkas_Intelligent_Exterior_Eggshell_2.5L

Intelligent Exterior Eggshell

High quality, water-soluble, extremely durable and flexible opaque wood finish – open pore enamel

Interkas_Intelligent_Eggshell_2.5L

Intelligent Eggshell

Eggshell reinforced water-based enamel finish, high quality, self-priming, low odor and with environmental certifications

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN