Soluzione Ossidante – Rust Activator

Water-based Oxidation and Aging Activator

It is used in combination with Klondike Ferro depending on the desired level of oxidation.

Soluzione Ossidante – Rust Activator

Water-based Oxidation and Aging Activator

It is used in combination with Klondike Ferro depending on the desired level of oxidation.

0,25L – 1,0L

Soluzione Ossidante is a water-based Oxidation and Aging Activator for interior use. In combination with Klondike Ferro it gives the surface many different levels of real oxidation.

Tools

Brush, Natural sponge

Cleaning
tools

Water

Drying between coats

4 h

Back in
service

2-3 days

Number of
layers

2-3
BENEFITS
INFORMATION

Soluzione Ossidante is a water-based Oxidation and Aging Activator for interior use. In combination with Klondike Ferro it gives the surface many different levels of real oxidation.

Preparation

After 8 hours at 20°C, on Klondike Ferro or L 50 Col 309 Copper the application continues with the application of Soluzione Ossidante – Oxidation Activator.

 

Application

  • Iron Oxidation Effect: Apply the Oxidation Activator by dabbing the surface with the natural sponge, filling approximately 60% of the surface and then work into the empty zones with the same sponge. After 3 hours at 20°C, apply the second layer (or more), depending on the desired level of oxidation.
  • Copper Oxidation Effect: Always use the natural sponge. Dab the surface with the Oxidation Activator in a percentage proportional to how much copper oxidation should remain visible at the end of the application. After 3 hours at 20°C, apply the second layer (or more), depending on the desired level of oxidation.
  • Galvanized Oxidation Effect: Apply the Oxidation Activator with vertical strokes over the entire surface. After 3 hours at 20°C apply the second coat (the third coat is optional).

Complementary products

You may also like