Rococo’ stucco veneziano 1000 Lucido Diretto

Ready-to-use paste mineral plaster for walls

For highly breathable coatings suitable for interiors with a very glossy mirror-like effect.

 

Rococo’ stucco veneziano 1000 Lucido Diretto

Ready-to-use paste mineral plaster for walls

For highly breathable coatings suitable for interiors with a very glossy mirror-like effect.

 

1,0L – 4,0L – 12,0L

Rococo’ stucco veneziano 1000 Lucido Diretto is an interior coating with excellent durability, good color stability over time and high breathability, which make it particularly suitable for reinforcing and decorating surfaces of great artistic and historical importance.

 

DOWNLOAD THE ΦΥΛΛΟ ΔΕΔΟΜΕΝΩΝ ΑΣΦΑΛΕΙΑΣ HERE

Tools

Spatula

Cleaning
tools

Water

Drying between coats

3 - 4 h

Back in
service

24 h

Number of
layers

2-3
BENEFITS
  • High gloss mirror finish
  • Breathable
  • Resistant to impact and normal abrasion
  • Very low VOCs
  • Product A
INFORMATION

Rococo’ stucco veneziano 1000 Lucido Diretto is an interior coating with excellent durability, good color stability over time and high breathability, which make it particularly suitable for reinforcing and decorating surfaces of great artistic and historical importance.

Preparation

  • New surfaces: use a suitable filler to repair the surface where necessary. When dry, sand the surface and apply a coat of PRIMER 1200 diluted 15 – 20% with water. After approximately 4 hours at 20°C, apply Rococo’ Stucco Veneziano 1000 Lucido Diretto.
  • Old surfaces: Remove old flaking or chalking paint and clean. Then apply a coat of PRIMER 1200 diluted 50% with water to act as a stabilizer. After approximately 4 hours at 20°C, apply a second coat of PRIMER 1200 diluted 20 – 30% with water. However, if the surfaces are sound and do not show the chalking effect, apply a coat of PRIMER 1200 diluted 20 – 30% with water. After approximately 4 hours at 20°C, apply Rococo’ Stucco Veneziano 1000 Lucido Diretto.

 

Application

  • Antique glossy effect with Rococo’ Stucco Veneziano 1000 Lucido Diretto: apply Rococo’ Stucco Veneziano 1000 Lucido Diretto using the PV 43 or PV 44 stainless steel trowel, creating a smooth and compact surface. After approximately 6 hours at 20°C, sand the surface thoroughly and then apply Rococo’ Stucco Veneziano 1000 Lucido Diretto with irregular trowel strokes 6 – 10 cm long and 4 – 6 cm apart, over the entire surface to be treated.
  • After approximately 1 hour at 20°C, apply a second coat as described above but covering the surface so that each stroke of the trowel partially overlaps the previous ones.
  • When the product is almost dry, rework the surface in all directions by pressing the surface and continue applying the product with the spatula until you obtain a glossy or even mirror-like reflective surface

 

Polishing and Protection

  • When Rococò Stucco Veneziano 1000 Lucido Diretto is almost dry, it should be polished by smoothing it with the stainless steel spatula, applying pressure to the product with movements of the spatula in all directions, until a shiny mirror surface is obtained.
  • To make Rococò Stucco Veneziano 1000 Lucido Diretto slightly floaty and even more shiny, apply a light layer of Cera Lucidante 420 water-based wax. When the wax dries, after about 3 – 4 hours at 20 ° C the surface remains dull. To polish it, use a woolen cloth and with rotational movements applying pressure to the surface you will obtain the desired gloss.

Complementary products

You may also like