Koncrete Honed – Polished Plaster

A sophisticated finish that embodies the aesthetics of modern concrete architecture

Το Koncrete Honed είναι ένας φυσικός πατητός σοβάς για τοίχους από ασβέστη και μάρμαρο με εκλεπτυσμένη, αστική αισθητική.

Koncrete Honed – Polished Plaster

A sophisticated finish that embodies the aesthetics of modern concrete architecture

Το Koncrete Honed είναι ένας φυσικός πατητός σοβάς για τοίχους από ασβέστη και μάρμαρο με εκλεπτυσμένη, αστική αισθητική.

Dust bag P01 – 18.0Kg

Koncrete Honed – Polished Plaster is a range of natural plaster finishes that mimic the look and feel of cast concrete for a contemporary urban feel. It presents a relatively smooth surface with a light surface sheen with subtle tonal variations and subtle pitting on the surface. The semi-polished finish redefines the raw aesthetic of cast concrete and creates a more refined, considered surface suitable for luxury interiors.

Tools

Stainless Steel Spatula, Plastic Armourcoat spatula

Cleaning
tools

Water

Drying between coats

10-12 h

Back in
service

24-36 h

Number of
layers

2
BENEFITS
  • Natural mineral material
  • Natural, breathable finish
  • Good water vapour permeability
  • Seamless and durable matt-satin surface for interiors 1.5mm plaster finish thickness
  • Up to 29% recycled content
  • Fire rating A2 EN13501
  • Low embedded carbon
  • Zero VOC content
  • Environmental Product
  • Declaration Health Product
  • Declaration LBC
  • Red List compliant
INFORMATION

Armourcoat Koncrete Honed is created using the standard P01 pressed plaster powder. While it is usually made from P01 White, Koncrete Honed can also be made from P30 (Creme shade) and P66 (Stone shade) pressed plasters. We will refer to them as “P01+” for short. Armourcoat P01+ is a natural mineral material consisting of hydrated lime, crushed marble and cement combined with special additives to control the working characteristics. Although essentially the same in composition, the three base powders P01, P30 and P66 are made up of different proportions of white, yellow, red and green crushed marble powder. This means that a range of natural stone colour finishes can be achieved without the addition of pigment.

 

Certifications

  • Fire Rating:
    • EN 13501-1:2018: A2-s1,d0.
    • ASTM E84: Class 1
  • VOC Content and Emissions:
    • Indoor Air Comfort: Meets
    • BREEAM International v2.0 (2016): Exemplary Level
    • ASTM D2369: <1
    • LEED v4 + v4.1 BETA: Meets
  • Embodied Carbon: EN15804 +A2: 0.34 kg CO2e.
  • Mold and Moss Resistant: ASTM D3274: 10/10/10.
  • Environmental Product Declaration: Has
  • Health Product Declaration: Has
  • LEED Declaration: Has

Application Areas

  • Interior
  • Walls
  • Ceilings
  • Columns
  • Indoor Swimming Pools
  • Panels

Complementary products