Interkas_63854_Fleur_Spray_Primer_Universale_300ml

Spray Universal – General purpose

Synthetic grey primer in spray for non-absorbent surfaces

Ideal for use on any non-absorbent surface, such as glass, varnished wood, plastics.

Interkas_63854_Fleur_Spray_Primer_Universale_300ml
63854_Fleur_Spray_Primer_universale_300ml
63854_Fleur_Spray_Primer_Universale_300ml_CAT copy_1
63857_Fleur_Primer_Legno_Spray_300ml

Spray Universal – General purpose

Synthetic grey primer in spray for non-absorbent surfaces

Ideal for use on any non-absorbent surface, such as glass, varnished wood, plastics.

COLORS

Γκρι
Γκρι

300ml

Synthetic grey spray primer for low to no absorbent surfaces to prepare them before applying Chalky Look chalk sprays. It is particularly suitable for priming hard, glossy surfaces such as tiles, MDF, melamine, old glass surfaces and most metals.

DOWNLOAD THE ΤΕΧΝΙΚΟ ΦΥΛΛΑΔΙΟ HERE

DOWNLOAD THE ΦΥΛΛΟ ΔΕΔΟΜΕΝΩΝ ΑΣΦΑΛΕΙΑΣ HERE

DOWNLOAD THE ΕΝΤΥΠΟ ΑΣΤΑΡΙA - ΒΕΡΝΙΚΙA - ΚΕΡΙ σε ΣΠΡΕΙ HERE

Tools

Spray

Cleaning
tools

White Spirit

Drying between coats

2 h

Back in
service

6 - 8 h

Number of
layers

1-2
BENEFITS
  • Dries quickly
  • Acrylic composition
  • Suitable for any non-absorbent surface
  • Very low VOC
  • For indoor and outdoor use
  • Excellent coverage – 300ml for approximately 2 m2 of surface
INFORMATION

Synthetic grey spray primer for low to no absorbent surfaces to prepare them before applying Chalky Look chalk sprays. It is particularly suitable for priming hard, glossy surfaces such as tiles, MDF, melamine, old glass surfaces and most metals.

Preparation and Application

  • Shake well before use, at least for one minute and use the Universal Primer Spray after you hear the sound of the can’s agitator balls.
  • Apply to dry and clean surfaces.
  • Apply in thin layers for best results, two thin layers are better than one thick layer. Recoat after 1-2 hours.
  • Full hardness is achieved 24 hours after application, depending on the thickness applied and ambient conditions.
  • After use, turn the can upside down and press the valve for several seconds until only gas appears to prevent clogging.
  • Do not spray into clogged equipment and use only in well-ventilated areas.

Complementary products

Interkas_Fleur_Chalky_Look_Spray_set

Chalky Look Spray

Water-based paint and chalk paint in spray with an extremely high matte finish

You may also like

Interkas_63855_Fleur_Spray_Primer_Antiruggine_300ml

Spray Antiruggine – Anti-Rust Spray

Synthetic White anti-rust primer, especially for metals

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN