Interkas_AGUAPACK_24H

Aguaplack easy joint 24h

Powdered putty for filling and finishing joints – 24 Hours

Use in plasterboards for filling and finishing joints.

Interkas_AGUAPACK_24H

Aguaplack easy joint 24h

Powdered putty for filling and finishing joints – 24 Hours

Use in plasterboards for filling and finishing joints.

ΧΡΩΜΑΤΑ

Λευκό
Λευκό

20,0Kg

Aguaplack easy joint 24h is a slow-drying traditional gypsum-based powder putty for filling and finishing joints in plasterboard, filling corner caps and screw heads and can be used to repair small holes and cracks in plaster or plasterboard. Finally, it is suitable for achieving all Quality Levels Q1 to Q4, from joint filling to final puttying with the highest quality standards.

ΚΑΤΕΒΑΣΤΕ ΤΟ ΤΕΧΝΙΚΟ ΦΥΛΛΑΔΙΟ ΕΔΩ

ΚΑΤΕΒΑΣΤΕ ΤΟ ΦΥΛΛΟ ΔΕΔΟΜΕΝΩΝ ΑΣΦΑΛΕΙΑΣ ΕΔΩ

Εργαλεία

Spatula, Large spatula (blade)

Καθαρισμός εργαλείων

Water

Στεγνό μεταξύ στρώσεων

24 h

Σε χρήση

24 h

Αριθμός
στρώσεων

2
ΠΛΕΟΝΕΚΤΗΜΑΤΑ
  • 24-hour setting composition
  • Fine granulometry for perfect joint finishing, with excellent hardness and cohesion properties
  • It is suitable for the immediate application of any type of coating: paints, wallpaper, high decoration products, decorative fiber mesh (and its corresponding coating plasters), etc.
  • Low density: high yield per m² of plasterboard Ideal product for large surfaces and extensive constructions
  • Maintains stable working consistency for 24 hours and can be applied mechanically with “bazooka” type machines for joint application
  • A+ product
ΠΛΗΡΟΦΟΡΙΕΣ

Aguaplack easy joint 24h is a slow-drying traditional gypsum-based powder putty for filling and finishing joints in plasterboard, filling corner caps and screw heads and can be used to repair small holes and cracks in plaster or plasterboard. Finally, it is suitable for achieving all Quality Levels Q1 to Q4, from joint filling to final puttying with the highest quality standards.

Preparation

 

  • The substrate must be dry, cohesive, stable and free from dust, grease, wax or any other substance that prevents the proper adhesion of the putty.
  • Remove dust from the joints. Use clean water, container and tools to mix the product. Add 2 parts powder to 1 part water (20 Kg powder – approximately 10 L water). Mix vigorously, preferably with an electric mixer, to create a uniform paste. Wait 5 minutes before use. The powder-water ratio can be adjusted according to the required consistency.
  • The paste remains workable for approximately 2 hours at 20°C.
  • High temperatures may reduce and low temperatures may extend the working time.
  • Do not stir once the setting process has started.
  • Do not add water or powder once the setting process has started. Do not add too much water to avoid shrinkage.

 

Application

 

  • Fill the joint and centre the tape over the joint, then position it by pressing down with a spatula and coat immediately.
  • Apply the 2nd coat extending 3 to 5 cm from each side of the joint.
  • Allow for ventilation to ensure proper drying.
  • Sand only when the joint is thoroughly dry.
  • Once the surface is dry, apply Beissier Drywall Primer to prepare for painting or Beissier FIXACRYL to prepare for wall coverings.
  • In general, substrates must be treated and prepared in accordance with local standards. In case of doubt, it is highly recommended to carry out a test application on a small area to determine suitability, compatibility and application conditions

Συμπληρωματικά προϊόντα

Interkas_PRYMER_ACQ

Prymer ACQ

Συμπυκνωμένο Αστάρι ομογενοποίησης και σταθεροποίησης ακρυλικής βάσεως νερού

Interkas_DRYWALL_PRIMER_4L

Aguaplast Dry Wall Primer

Λευκό αστάρι με βάση το νερό, ιδανικό για γυψοσανίδες, σπατουλαριστές επιφάνειες και επί τοίχου

Θα σας αρέσει επίσης

Interkas_AGUAPACK_TOPJOINT_2H

Aguaplack top joint 2h

Στόκος σε σκόνη με βάση το γύψο για πλήρωση και φινίρισμα αρμών – 2 Ώρες

Interkas_UNIVERSAL_PRO_5KG

Aguaplast Universal Pro

Επαγγελματικός ελαφρού βάρους στόκος σε σκόνη, πολλαπλών χρήσεων

Ανδρομάχης 217-219, Καλλιθέα 176 73
Τ. 210 9521772, info@interkas.gr

Εταιρείες

2025

Ιnterkas All Rights Reserved | Όροι & Προϋποθέσεις

Designed and developed by DURAN

Ανδρομάχης 217-219, Καλλιθέα 176 73
Τ. 210 9521772, info@interkas.gr

  • Εταιρείες
2025 Ιnterkas All Rights Reserved

Terms and conditions | Cookies policy

Designed and developed by DURAN