Solvent Impregnation Varnish 8 Years

Solvent-based impregnating varnish of polyurethane composition

8 Year Solvent Impregnating Varnish, intended for the protection and decoration of all exterior and vertical wooden coatings.

Solvent Impregnation Varnish 8 Years

Solvent-based impregnating varnish of polyurethane composition

8 Year Solvent Impregnating Varnish, intended for the protection and decoration of all exterior and vertical wooden coatings.

COLORS

Άχρωμο / Incolore
Πεύκο / Pin
Δρυς Ανοιχτή / Noce Chiaro
Δρυς Μεσαίο / Noce Medio
Σκούρα Δρυς / Noce Scuro
Έλατο / Douglas
Άχρωμο / Incolore
Πεύκο / Pin
Δρυς Ανοιχτή / Noce Chiaro
Δρυς Μεσαίο / Noce Medio
Σκούρα Δρυς / Noce Scuro
Έλατο / Douglas

0,75L – 2,5L

The 8 Year Solvent Impregnation Varnish offers all exterior and interior wood structures strong long-lasting protection (up to 8 years of resistance in outdoor use*). Its professional composition based on polyurethane resins gives it flexibility and great resistance for enhanced waterproofing against climatic attacks. Its very easy-to-use composition – gel form – offers ease of use and the best ability to cover imperfections, for excellent results on all wood, new or old.

DOWNLOAD THE ΦΥΛΛΟ ΔΕΔΟΜΕΝΩΝ ΑΣΦΑΛΕΙΑΣ HERE

Tools

Paintbrush, Spray gun

Cleaning
tools

WS

Drying between coats

10 h

Back in
service

24 h

Number of
layers

2-3
BENEFITS
  • Anti U.V., water repellent and microporous
  • Impervious to rain, snow and humidity
  • Anti-graying
  • Waxed surface effect
INFORMATION

Intended for the protection and decoration of all exterior and vertical wooden coatings.

Its composition, based on polyurethane resins, ensures elasticity and resistance to ultraviolet radiation and bad weather conditions.

Its filling power enhances the final finish, for lasting hold. High performance.

Gel composition: does not drip.

Waterproof: Guarantees the flow of water, so that the wood does not get wet.

High protection solvent product.

Applied to new and old wood. Does not crack.

Preparation

  • New or rough wood: perfect adhesion on bare, clean, dry and healthy wood (exotic wood must be thoroughly degreased with acetone before application).
  • On greyed or blackened wood: clean with Dégriseur Bois Syntilor Cleaner and then sand with sandpaper No. 80-100.
  • On old impregnation varnish: sand lightly with sandpaper No. 120.
  • On old finishes (paints, varnishes, etc.): sand with sandpaper No. 40, 60 and 100 or use the abrasive Décapant Gel Multi-Supports to restore the wood surface. Clean thoroughly from dust.
  • On contaminated wood: scrape, clean and then apply an appropriate treatment product. Let it dry for at least 48 hours before applying the impregnation varnish.

 

Application

  • Ready to use, do not dilute.
  • Mix well before use.
  • Apply with a brush, a wide brush or a paint gun in the direction of the wood grain in generous coats.
  • On new or bare exterior wood: apply 3 coats.
  • On new or renovated interior wood: apply 2 coats.
  • On wood with a pre-existing impregnation varnish in good condition: a single coat is sufficient.
  • On wood with a pre-existing impregnation varnish in poor condition: sand the damaged surfaces with 120 grit sandpaper, clean thoroughly from dust and then apply 2 coats.
  • Sand lightly between coats (120 to 180 grit sandpaper) to eliminate minor roughness in the wood and achieve a beautiful appearance.
  • Do not exceed 48 hours between 2 coats.

IMPORTANT: in outdoor areas, the “colorless” shade is also used for maintenance or renovation on new or already impregnated wood. Do not apply to parquet and wooden floors.

Complementary products

You may also like