Impregnation Varnish – Matte Finish 4 Years

MATT FINISH/NATURAL WOOD impregnation varnish

Water-based MATTE FINISH impregnation varnish of polyurethane composition, with satisfactory resistance to weather conditions and UV radiation.

Impregnation Varnish – Matte Finish 4 Years

MATT FINISH/NATURAL WOOD impregnation varnish

Water-based MATTE FINISH impregnation varnish of polyurethane composition, with satisfactory resistance to weather conditions and UV radiation.

COLORS

Άχρωμο / Incolore

Δρυς ανοιχτή / Chene Clair

Καρυδιά μεσαία / Noyer Moyen

Καρυδιά Σκούρα / Noyer Fonce

Δρυς Σκούρα / Chene Fonce

Τικ / Teck

Αγριοκερασιά /Merisier

Λευκό / Blanc

Άχρωμο / Incolore

Δρυς ανοιχτή / Chene Clair

Καρυδιά μεσαία / Noyer Moyen

Καρυδιά Σκούρα / Noyer Fonce

Δρυς Σκούρα / Chene Fonce

Τικ / Teck

Αγριοκερασιά /Merisier

Λευκό / Blanc

0,5L – 2,5L

The 4-year MATTE FINISH Impregnation Varnish gives all exterior and interior wood structures natural beauty and long-lasting protection (up to 4 years of resistance in exterior use*). Impregnates, decorates and protects wood. Ideal for fences, windows, panels, shutters, beams. Highlights the wood grain. Does not peel.

DOWNLOAD THE ΤΕΧΝΙΚΟ ΦΥΛΛΑΔΙΟ HERE

DOWNLOAD THE ΦΥΛΛΟ ΔΕΔΟΜΕΝΩΝ ΑΣΦΑΛΕΙΑΣ HERE

DOWNLOAD THE ΧΡΩΜΑΤΟΛΟΓΙΟ - ΕΝΤΥΠΟ HERE

Tools

Paintbrush, Spray gun

Cleaning
tools

Water

Drying between coats

3 h

Back in
service

12 h

Number of
layers

1 - 3

Natural wood matte finish
Anti-UV
Microporous

The MAT FINISH Impregnation Varnish 4 years, offers satisfactory protection to all exterior and interior carpentry structures.

Its composition based on polyurethane resins provides flexibility and durability for strong waterproofing against climatic attacks.

Microporous: allows the wood to breathe.

Its fluid texture deeply impregnates the wood and guarantees high protection.

Provides protection for up to 4 years outdoors.

Its matte appearance highlights the natural grain of the wood.

Easy to apply: odorless, quick drying.

Perfect adhesion to most types of wood.

Compatible with all old impregnation varnishes. Quick renovation without the need to completely remove existing layers.

Preparation

New or rough wood: perfect adhesion on bare, clean, dry and healthy wood (exotic wood must be thoroughly degreased (with acetone) before application).
On greyed or blackened wood: clean with Dégriseur Bois Syntilor Cleaner and then sand with sandpaper No. 80-100.
On old impregnation varnish: sand lightly with sandpaper No. 120
NOTE: The 4-year MATTE FINISH Impregnation Varnish can be applied to all old types of impregnation varnishes.
On old finishes (paints, varnishes, etc.): sand with sandpaper No. 40, 60 and 100 or use the corrosive Décapant Syntilor to restore the wood surface. Clean thoroughly from dust.
On contaminated wood: sand, clean and then apply a suitable treatment product. Allow to dry for at least 48 hours before applying the impregnation varnish.

Application

Ready to use, do not dilute.
Mix well before use.
Apply with a brush, a wide brush or a spray gun in the direction of the wood grain in generous coats.
On new or bare exterior wood: apply 3 coats.
On new or renovated interior wood: apply 2 coats.
On wood with a pre-existing impregnation varnish in good condition: a single coat is sufficient.
On wood with a pre-existing impregnation varnish in poor condition: sand the damaged surfaces with 120 grit sandpaper, clean thoroughly from dust and then apply 2 coats.
Do not exceed 48 hours between 2 coats.
On vertical wood surfaces and in case of South or West exposure, apply 3 coats.
Do not apply on Red Cedar.

IMPORTANT: outdoors, the “clear” shade is also used for maintenance or renovation on new or already impregnated wood. Do not apply to parquet and wooden floors.