Interkas_VIEROSIL_Q

Vierosil Q

Siloxane composition, quartz-based, highly breathable and highly water-repellent paint

Provides strong protection against moss, algae and mold.

Interkas_VIEROSIL_Q
Vierosil_Q_1
Vierosil_Q_2
Vierosil_Q_3

Vierosil Q

Siloxane composition, quartz-based, highly breathable and highly water-repellent paint

Provides strong protection against moss, algae and mold.

1,0L – 5,0L – 14,0L

Vierosil Q is a paint for exterior walls, containing water-based acrylic-siloxane resins, quartz, inorganic pigments and micronized fillers and fillers. It presents very good water repellency and water vapor permeability characteristics and has excellent adhesion to all old and new surfaces.

DOWNLOAD THE ΤΕΧΝΙΚΟ ΦΥΛΛΑΔΙΟ HERE

DOWNLOAD THE ΦΥΛΛΟ ΔΕΔΟΜΕΝΩΝ ΑΣΦΑΛΕΙΑΣ HERE

Tools

Roller, Brush

Cleaning
tools

Water

Drying between coats

4-8 h

Back in
service

24 h

Number of
layers

2
BENEFITS
  • Very good water repellency and water vapor permeability characteristics
  • Excellent adhesion to all old and new surfaces
  • Thanks to its special composition, the product is easy to apply
  • The type of binder used makes the product resistant to alkalis and adverse weather conditions
  • It has great stability also on walls particularly exposed to sunlight and bad weather conditions
  • It contains special surface preservatives, which provide the coating with preventive protection against the growth of moss, algae and fungi
INFORMATION

Vierosil Q is an exterior paint based on quartz, acrylic-siloxane resins, inorganic pigments, micronized fillers and special surface preservatives, which protect the coating from the formation of moss, algae and fungi. The product is applied in two layers, with an average consumption of approximately 0.25 lt/m2. It is suitable for use in the renovation of buildings located in historic urban centers and on plaster surfaces, cementitious wall surfaces, different mortars or equivalent, prefabricated cementitious elements, porous natural stones and surfaces already treated with other paints, after preparation, possible restoration with an anti-mold solution and subsequent application of Primer ACQ.

Preparation

  • To achieve maximum performance of Vierosil Q it is necessary to completely remove any pre-existing paint coating. Maximum water-repellent performance is achieved after 28 days of drying.
  • Local repair: for best results we recommend using a roller.
  • Ambient and substrate conditions:
    • Ambient application temperature: less than +5°C / more than +35°C
    • Relative humidity: < 80%
    • Substrate temperature: less than +5°C / more than +35°C
    • Do not apply to substrates exposed to direct sunlight or strong wind
  • Dilute the product with water 20% by volume for the first coat and 10% for the second. Dilute the product according to the instructions and mix until a homogeneous mixture is obtained.
  • New, mature, homogeneous, complete city wall surfaces:
    • Clean thoroughly, removing all traces of dust.
    • Make sure the wall is completely dry, apply a coat of Primer ACQ and wait 24 hours.
  • Wall surfaces made of lime, cement, plaster, already coated or partially degraded:
    • Synthetic paints and coatings: to make the most of the product’s breathability characteristics, it is recommended to completely remove old paints and synthetic coatings either with a special abrasive or with a pressure washer and water jet.
    • Mineral or absorbent paints and coatings: remove all traces of dirt, parts that are not completely adhered and any frayed areas.
  • Fill and smooth with compatible products and let dry. Make sure the wall is completely dry and apply a coat of Primer ACQ and wait 24 hours.
  • If there are traces of mold or moss, first apply a mold and moss cleaning solution.

 

Application

Apply two coats of Vierosil Q with a roller or brush.

Complementary products

Interkas_PRYMER_ACQ

Prymer ACQ

Concentrated water-based acrylic homogenizing and stabilizing primer

You may also like

Interkas_VIEROSIL_LOTUS

Vierosil Lotus

Smooth siloxane paint with lotus effect

Interkas_VIEROSIL_3D_MAT

Vierosil 3D Mat

High-strength acrylic-siloxane paint with glass microspheres

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN