Subito BIANCO A+

White Plastic Paint for Interior Walls

A+ interior grade plastic paint, which maintains the substrate's breathability, is ready to use and is quite white.

Subito BIANCO A+

White Plastic Paint for Interior Walls

A+ interior grade plastic paint, which maintains the substrate's breathability, is ready to use and is quite white.

COLORS

Λευκό / White
Λευκό / White

4L + 1L Free

10,0 L

The washable plastic wall paint Subito Bianco A+ helps the consumer in its application, being easy to use, it is applied in one layer and is ready to use. With respect for the planet and the health of the consumer, it has an A+ product certification, does not contain formaldehyde, its packaging is made of 30% recycled plastic and has EPD certification. Its bleaching composition gives a frosty white shade, with a particularly remarkable result.

DOWNLOAD THE ΦΥΛΛΟ ΔΕΔΟΜΕΝΩΝ ΑΣΦΑΛΕΙΑΣ HERE

Tools

Roller, Brush, Spray Gun

Cleaning
tools

Water

Drying between coats

4 - 6 h

Back in
service

24 h

Number of
layers

2
BENEFITS
  • For use with one layer
  • Keeps the substrate breathable
  • Ready-to-use product
  • Pretty white
  • A+ composition
  • Washable
INFORMATION

The washable plastic wall paint Subito Bianco A+ is a high-coverage wall paint. Ready to use, thanks to its bleaching composition, it is ideal for giving a whiter touch to the walls of your home. To enhance its tone, it is recommended to combine the environment with a cold light. Subito Bianco A+ leaves the breathability of the substrate unchanged, it also respects health and the planet thanks to its formaldehyde-free composition, A+ certification for the IAQ regulation, is contained in packaging made of 30% recycled plastic and has EPD certification.

Preparation and Application

  • Clean the surface thoroughly, fill any imperfections, sand with sandpaper grit 150-180 and remove dust thoroughly.
  • Make sure there are no mold problems. If necessary, perform a specific preventive removal or prevention cycle with a suitable anti-mold product.
  • Mix the product well before starting to paint.
  • Apply a coat of acrylic primer PRYMER ACQ – MaxMeyer.
  • After 4-6 hours, apply a coat of SUBITOBIANCO A+, and in the case of particularly absorbent surfaces, apply a second coat of product.
    • Dry to the touch: 1 hour
    • Dry to the touch: maximum 24 hours
    • Recoating: 4 ÷ 6 hours

Complementary products