Interkas_PRYMER_PGM

Prymer PGM

Wall primer with the highest level of coverage, opacity and filling

It is part of the ETIC systems: "VIEROCLIMA PV", "VIEROCLIMA P", "VIEROCLIMA R" & "VIEROCLIMA S".

Interkas_PRYMER_PGM

Prymer PGM

Wall primer with the highest level of coverage, opacity and filling

It is part of the ETIC systems: "VIEROCLIMA PV", "VIEROCLIMA P", "VIEROCLIMA R" & "VIEROCLIMA S".

14,0L

Prymer PGM is a wall primer with a very high level of coverage, opacity and filling. It is used as an insulation and preparation primer in Vieroclima external thermal insulation systems. It reduces water absorption from the substrate, offers high adhesion and extends the workability time of Vieroclima plasters.

DOWNLOAD THE ΤΕΧΝΙΚΟ ΦΥΛΛΑΔΙΟ HERE

DOWNLOAD THE ΦΥΛΛΟ ΔΕΔΟΜΕΝΩΝ ΑΣΦΑΛΕΙΑΣ HERE

Tools

Brush, Roller

Cleaning
tools

Water

Drying between coats

4-6 h

Back in
service

24 h

Number of
layers

1-2
BENEFITS
  • High adhesion
  • Preservative-free
  • Very good opacity, high hiding power
  • Minimized emissions, solvent-free
  • Water-soluble
  • Eco-friendly, low odor
  • Waterproof
  • Fire reaction: (non-flammable)
INFORMATION

Prymer PGM is a wall primer with a very high level of coverage, opacity and filling for mineral exterior and interior surfaces, such as mineral renders/plasters and plasterboards (minimizing the risk of peeling for thin-layer plaster fillers). Excellently suitable as a primer coat that promotes adhesion for subsequent coats of synthetic (organic), silicate emulsion-based renders/plasters and mineral or colored stones. It facilitates application and texture and leads to higher performance.

Preparation and Application

  • New unpainted walls (New recently treated plasters, prefabricated panels, new plasters, plasterboards): If the substrates are not particularly absorbent, apply 1 or 2 coats of Prymer PGM directly.
  • Walls painted with absorbent paints (e.g. Lime-Based): If the surface is not particularly friable, clean it well, repair any imperfections, sand and dust. Apply 1 or 2 coats of Prymer PGM directly. In case of paint that is particularly friable, or shows chalking, sand, apply 1 coat of PRYMER ACQ 100 and after 6 – 12 hours proceed to the application of 1 – 2 coats of Prymer PGM.
  • Walls painted with non-absorbent paints – acrylics: Clean the surface thoroughly, repair any imperfections, sand and dust. Apply 1 or 2 coats of Prymer PGM directly.
  • Wall surfaces with Vieroclima thermal insulation system: After the reinforcement system (glue-mesh) has undergone the relevant treatment, proceed to apply a coat of Prymer PGM.

Complementary products

Interkas_VIEROACRYL_RST

Vieroacryl RST 1,0/1,2/1,5

Layered coating - colored plaster made with acrylic resins of grain size 1.0/1.2/1.5mm

Interkas_ADESAN_G5

Adesan G5

Cementitious adhesive for smoothing and installing reinforcement mesh

You may also like

Interkas_PRYMER_ACQ

Prymer ACQ

Concentrated water-based acrylic homogenizing and stabilizing primer

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN