Interkas_Interior_Oil_Eggshell_1L
Interkas_Interior_Oil_Eggshell_2.5L

Interior Oil Eggshell

Hard but elastic, durable and waterproof solvent-based enamel

It is designed for interior use on properly prepared surfaces.

Interkas_Interior_Oil_Eggshell_1L
Interkas_Interior_Oil_Eggshell_2.5L
Invisible Green 56, Livid 263 copy
Cape Red 279, Mid Azure Green 96, Trumpet 196 copy
Castell Pink 314, Nether Red 315, Arras 316 copy

Interior Oil Eggshell

Hard but elastic, durable and waterproof solvent-based enamel

It is designed for interior use on properly prepared surfaces.

Δείτε το χρωματολόγιο Colours of England

Δείτε το χρωματολόγιο Colour Scales

Δείτε το χρωματολόγιο Stone

Δείτε το χρωματολόγιο Grey

Δείτε το χρωματολόγιο Sweet Treats

1,0L – 2,5L

Interior Oil Eggshell is a tough yet flexible, durable and waterproof solvent-based enamel designed for interior use on properly prepared surfaces. Its improved application properties and extended workability help produce a very high quality, low gloss finish.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Brush, Roller, Spray Gun

Cleaning
tools

White Spirit

Drying between coats

4 h

Back in
service

16 - 20 h

Number of
layers

2
BENEFITS
  • Manufactured under the auspices of the environmental quality management systems ISO 9001:2015 & ISO 14001:2015
  • A+ Product
  • Washing/abrasion resistance – DIN EN 13 300 – category 1
  • High covering capacity
A+_EMISSION
A+_EMISSION
INFORMATION

Interior Oil Eggshell is a tough yet flexible, durable and waterproof solvent-based enamel designed for interior use on properly prepared surfaces. Its improved application properties and extended workability help produce a very high quality, low gloss finish.

Preparation

  • General: Remove any surface imperfections and repair any defects to ensure a top quality finish.
  • New Wood: For best results on new, uncoated wood containing resinous knots, apply a coat of Aluminium Wood Primer to prevent staining and/or discolouration. Follow with a coat of Little Greene Intelligent ASP Multi-Surface Primer. Resinous hardwoods require initial cleaning and treatment with Little Greene Aluminium Wood Primer (please consult the relevant product data sheets for further details).
    • Ensure the moisture content of the timber is below 15% before commencing application. Damp wood should never be painted as this can cause blistering, peeling, cracking and premature coating failure.
    • Green Oak should not be painted unless it has been externally cured for at least 6 months.
  • Metals: New ferrous/non-ferrous metals should be cleaned by hand or power tool to remove any surface rust prior to application. Bare or corroded iron or steel will require treatment with 2 coats of Little Greene Intelligent ASP Primer.
  • Plastics: For long-term performance and durability, clean and abrade all surfaces thoroughly. For best results, apply one coat of Little Greene Intelligent ASP Multi-Surface Primer.
  • Existing Paint Finish: Remove all loose and flaking paint. Degrease with a suitable detergent solution, then rinse with clean water. Sand thoroughly with medium grit sandpaper, e.g. 120-150 grit to create a smooth, defect-free surface, paying more attention to areas where paint has been removed. Make repairs, sand and apply a coat of Little Greene Intelligent ASP Multi-Surface Primer to increase adhesion to the existing substrate. Follow with 2 coats of Little Greene Interior Oil Eggshell.

 

Application

  • Stir well before use. Do not apply to surfaces when the ambient temperature is below 8°C.
  • Brushing: Always use high quality synthetic bristle brushes that are the right size for the job. Apply Interior Oil Eggshell Ripolin in even strokes and only extend the paint area so that a wet edge is easily maintained. For a higher quality final finish, apply final strokes in the same direction and do not re-apply where the Ripolin has already started to dry.
  • For intricate objects or when high ambient temperatures/or high air flow conditions cannot be avoided, the working time can be extended by adding 5% (by volume) White Spirit.
  • Roller Painting: Use a Ripolin roller (mohair or foam) for best appearance and coverage on smooth surfaces. Keep all final movements of the roller always in the same direction, maintaining a wet edge throughout the work.

Complementary products

Interkas_Intelligent_ASP_2.5L

Intelligent ASP

High opacity and low odor water-based matte primer and undercoat

You may also like

Interkas_Intelligent_Satin_2.5L

Intelligent Satin

Water-based reinforced Satin finish enamel, high quality, self-priming, low odor and with excellent durability

Interkas_Intelligent_Eggshell_2.5L

Intelligent Eggshell

Eggshell reinforced water-based enamel finish, high quality, self-priming, low odor and with environmental certifications

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN