Intelligent Floor Paint

High performance acrylic water based floor paint

It is catalyzed by ambient air upon opening the package, it is very resistant to cleaning and washing, wear, abrasion and chemical attacks.

Lamp Black 228, Urbane Grey 225 Detail copy

Shallows 223, JAck Black 119, Smalt 255 and Air Force Blue 260 - 1 copy

Shallows 223, JAck Black 119, Smalt 255 and Air Force Blue 260 - 2 copy

Intelligent Floor Paint

High performance acrylic water based floor paint

It is catalyzed by ambient air upon opening the package, it is very resistant to cleaning and washing, wear, abrasion and chemical attacks.

1,0L – 2,5L

Intelligent Floor Paint is a high-performance, water-based acrylic floor paint that catalyzes with ambient air upon opening the package, is very resistant to cleaning and washing, wear, abrasion and chemical attack. It is recommended for concrete and wooden floors subject to light to moderate traffic.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Brush, Roller, Paint Gun

Cleaning
tools

Water

Drying between coats

1 -4 h

Back in
service

12 h

Number of
layers

2-3

Child-friendly (Toy Safety Certification BS EN71-3:2019)
Manufactured under the auspices of the environmental quality management systems ISO 9001:2015 & ISO 14001:2015
A+ Product Washing/Abrasion
Resistance – DIN EN 13 300 – category 1
Almost zero Volatile Compound Emissions (VOC 1 g/L)

Intelligent Floor Paint is a high-performance, water-based acrylic floor paint that catalyzes with ambient air upon opening the package, is very resistant to cleaning and washing, wear, abrasion and chemical attack. A+ product and child-friendly. Recommended for concrete and wooden floors subject to light to medium traffic.

Preparation

General: Remove any surface imperfections and repair any defects to ensure a top quality finish.
New Wood: Unpreserved softwood timber should be treated with a suitable wood preservative.
- For best results on new, uncoated softwood containing resinous knots, apply one coat of Aluminium Wood Primer to prevent staining and/or discolouration. This is followed by one coat of Little Greene Intelligent ASP Multi-Surface Primer followed by two (2) coats of Intelligent Floor Paint.
- Resinous hardwoods require initial cleaning and treatment with Little Greene Aluminium Wood Primer (refer to relevant product data sheets for further details). This should be followed by one coat of Little Greene Intelligent ASP Multi-Surface Primer.
- Ensure the moisture content of the timber is below 15% before commencing application. Wet wood should never be painted as this can cause blistering, peeling, cracking and premature coating failure.
- Green Oak should not be painted unless it has been exposed to the outside and dried for at least 6 months.
Metals: New ferrous/non-ferrous metals should be cleaned by hand or power tool to remove any surface rust prior to application. Bare or corroded iron or steel will require treatment with 2 coats of Little Greene Intelligent ASP Primer.
Existing Paint Finish: Remove all loose and flaking paint. Degrease with a suitable detergent solution, then rinse with clean water. Sand thoroughly with medium grit sandpaper, 120-150 grit, to create a smooth, defect-free surface, focusing more on areas where paint has been removed. Make repairs properly and sand and apply a coat of Little Greene Intelligent Floor Paint as a primer, thinning with 5 to 25% (by volume) water, depending on the porosity of the substrate.
Concrete: Sweep or vacuum the surface to remove dust. If the concrete is chalky, the surface should be either sandblasted or treated with an acid-based solution to make it stable before painting. Minor surface stains, such as oil stains, should be removed by flame treatment. Dilute the first coat with approximately 15% (by volume) water to allow for penetration into the substrate and then apply two full coats of Little Greene Intelligent Floor Paint.
Natural Stone: Porous stone can be treated as directed for concrete. Intelligent Floor Paint is not recommended for painting directly onto non-porous granite masonry.

Application

Stir well before use.
Do not apply to surfaces when the ambient temperature is below 8°C.
For exterior application, do not apply if there is a risk of rain or frost during application or the drying period.
Brushing: Always use high quality synthetic bristle brushes that are the right size for the job. Apply Intelligent Floor Paint in even strokes and only extend the paint area so that a wet edge is easily maintained. For a higher quality finish, apply final strokes in the same direction and do not re-roll over areas where the paint has already started to dry.
Roller: Use a short pile fur paint roller for best results on smooth surfaces. Increase the pile size of the roller for rougher surfaces. Keep all final roller strokes in the same direction, maintaining a wet edge throughout, and do not go over areas where the paint has already started to dry because there is a serious chance it will leave marks.

Interior use

Exterior use

Varnishes - Impregnation products for outdoor use

Varnishes - Wood finishing products for interior use

Wood Floors & Flooring

Artists & DIY paintings - Chalk Paints

Decoration products & Coatings

Decoration tools

Fillers & Smoothing compounds

Bio based & ECO

Intelligent Floor Paint

High performance acrylic water based floor paint

It is catalyzed by ambient air upon opening the package, it is very resistant to cleaning and washing, wear, abrasion and chemical attacks.

Intelligent Floor Paint

High performance acrylic water based floor paint

It is catalyzed by ambient air upon opening the package, it is very resistant to cleaning and washing, wear, abrasion and chemical attacks.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Cleaning
tools

Drying between coats

Back in
service

Number of
layers

Complementary products

Intelligent ASP

High opacity and low odor water-based matte primer and undercoat

You may also like

Intelligent Satin

Water-based reinforced Satin finish enamel, high quality, self-priming, low odor and with excellent durability

Intelligent Gloss

High quality, self-priming, low-odor, water-based, high-gloss enamel finish, with excellent durability.

Intelligent Eggshell

Eggshell reinforced water-based enamel finish, high quality, self-priming, low odor and with environmental certifications

Companies

Intelligent Floor Paint

High performance acrylic water based floor paint

It is catalyzed by ambient air upon opening the package, it is very resistant to cleaning and washing, wear, abrasion and chemical attacks.

Intelligent Floor Paint

High performance acrylic water based floor paint

It is catalyzed by ambient air upon opening the package, it is very resistant to cleaning and washing, wear, abrasion and chemical attacks.

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Cleaning tools

Drying between coats

Back in service

Number of layers

Complementary products

High opacity and low odor water-based matte primer and undercoat

You may also like

Water-based reinforced Satin finish enamel, high quality, self-priming, low odor and with excellent durability

High quality, self-priming, low-odor, water-based, high-gloss enamel finish, with excellent durability.

Eggshell reinforced water-based enamel finish, high quality, self-priming, low odor and with environmental certifications

Companies

Ρυθμίσεις Απορρήτου

Παρακάτω μπορείτε να ενεργοποιήσετε ή απενεργοποιήσετε τους διαφορετικούς τύπους cookies:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Cleaning
tools

Back in
service

Number of
layers