It is the technique that, combined with Segui il tuo ISTINTO, gives the Marble effect.
Segui il tuo ISTINTO in marble effect crafted by experienced hands of creative craftsmen.
It is the technique that, combined with Segui il tuo ISTINTO, gives the Marble effect.
Segui il tuo ISTINTO in marble effect crafted by experienced hands of creative craftsmen.
It is practically an imitation of Marble, worked by experienced and trained craftsmen. Estasi di Marmo can be left natural for maximum naturalness and breathability, it can be protected with the natural wax Cera d’api for natural water repellency or made completely waterproof with Vetro and Ipervetro for use in showers or kitchens.
It is practically an imitation of Marble, worked by experienced and trained craftsmen. Estasi di Marmo can be left natural for maximum naturalness and breathability, it can be protected with the natural wax Cera d’api for natural water repellency or made completely waterproof with Vetro and Ipervetro for use in showers or kitchens.
Preparation
Old surface.
Remove all loose old and peeling paint and clean. Then apply a stabilizing primer depending on the type of surface. When the primer is completely dry, apply a coat of PRIMUS NATURALE diluted up to a maximum of 10% with water. After 4-6 hours at 20°C proceed with the application of ISTINTO.
New surface.
Clean (and if necessary, fill in) the surface you want to paint. Once dry, sand the surface and apply a coat of suitable primer. When the primer is completely dry, apply a coat of PRIMUS NATURALE diluted up to a maximum of 10% with water. After 4-6 hours at 20°C proceed with the application of ISTINTO.
Note: When the substrate is plasterboard, the surface must be completely smoothed, not just the joints and screws. It must then be primed with a suitable plasterboard filler and then the above preparation procedure must be followed.
Application
Protection
5-6 hours later and in order to increase the resistance and washability of the surface, apply the protective natural wax Cera d’Api.
With VETRO water varnish and IPER VETRO: Protective water-based varnishes-resins.
VETRO Opaco/Satinato/Lucido: the product is ready to use. Let the surface to be applied dry for at least 48 hours. Apply 1 or 2 coats with a brush or roller.
IPER VETRO: follow the product preparation instructions. Before applying IPER VETRO, apply a coat of VETRO Opaco diluted 1:4 with water. Let it dry for 2-4 hours and then proceed with the application of 2 coats of IPER VETRO with a roller and spatula.
Protective water-based varnish finish in Matte, Glossy and Satin finishes
2024 Ιnterkas All Rights Reserved | Terms & Conditions
