High protection water-based decking oil – Saturateur Ultra Protect

Decking Oil - Oil for wooden floors

It protects, deeply nourishes and beautifies terraces, decks, wooden grills and the pool area, giving them a beautiful natural matte appearance.

High protection water-based decking oil – Saturateur Ultra Protect

Decking Oil - Oil for wooden floors

It protects, deeply nourishes and beautifies terraces, decks, wooden grills and the pool area, giving them a beautiful natural matte appearance.

COLORS

Φυσικό ξύλο / Naturel
Τικ / Teck
Φυσικό ξύλο / Naturel
Τικ / Teck

0,75L – 2,5L – 5,0L

The High Protection water-based Decking oil, impregnates, permanently protects and decorates all wooden terraces and decks. Easy and economical application: directly on new wood without prior 6-month natural aging, no wiping required. 2 coats are enough for a long-lasting result.

Tools

Brush, Roller

Cleaning
tools

Water

Drying between coats

30' min

Back in
service

12 min

Number of
layers

2
BENEFITS
  • High resistance to UV radiation and bad weather conditions
  • Resistant to chlorinated and salt water
  • Direct application to new wood
  • Quick drying: 30 minutes between coats
INFORMATION

Maximum protection against UV rays, humidity, chlorinated or salt water and stains.

For all types of wood: exotic, softwood, hardwood, pre-impregnated. Directly on new wood without prior aging.

Easy application without wiping, guaranteed results without joints.

Quick drying: return the terrace to traffic during the day.

Easy maintenance: local treatments are possible without sanding. Natural aging without deterioration or cracking.

Preparation

  • New Exotic Wood: Degrease with a cloth soaked in acetone.
  • Old untreated wood, stained or greyed: clean using Syntilor’s greyed wood cleaner Dégriseur Nettoyant.
  • Old finishes (old paints, varnishes, etc.): sand with sandpaper No 40, 60 and then 100 or remove old substrates with Syntilor’s abrasive Décapant Gel Multi-Supports.
  • On contaminated wood: scrape, clean and then apply a suitable treatment product. Let dry for at least 48 hours before applying the impregnation varnish.
  • Do not apply wood stains or impregnation varnish beforehand. Do not apply over freshly applied other Decking oil.
  • Make sure the wood is dry: at least 2-3 days of good weather before application and that there is no risk of rain within the first 24 hours after applying the 2nd coat.

PROFESSIONAL TIP: A light sanding (sandpaper No 80-100), before application, on all surfaces, will open the pores and facilitate penetration.

 

Application

  • Mix well before and during use, do not dilute.
  • Apply a 1st thin coat in the direction of the wood fibers (well soak the grooves, joints and edges).
  • Let it penetrate for 20′ to 30′ minutes.
  • Apply the 2nd thin coat as soon as the wood loses its “wet” appearance. Brush off any excess product to avoid drips or shine on the surface.
  • NO WIPING NEEDED
  • The surfaces are ready for use 12 hours after application.

 

Maintenance

  • As soon as the wood surface begins to naturally lighten from weathering and UV radiation, apply High Protection Water-Based Decking Oil directly to the lightened areas.
  • In case of delayed maintenance, first clean with Syntilor Dégriseur Nettoyant, a cleaner for greyed wood.

Complementary products

You may also like