Interkas_Decapant-multi-supports

Decapant Gel Multi Supports

Multi-purpose corrosive in gel form.

It works faster and more effectively to strip and thoroughly clean all types of surfaces.

Interkas_Decapant-multi-supports
Decapant_Gel_Special_Bois_Syntilor_1
Decapant_Gel_Multi_Supports_Syntilor_1

Decapant Gel Multi Supports

Multi-purpose corrosive in gel form.

It works faster and more effectively to strip and thoroughly clean all types of surfaces.

0,5L – 1,0L

General purpose corrosive that, thanks to Chrono 10’ technology, acts quickly and removes all different substrates. Ideal for quick removal of paints, varnishes, glues, putties, sealants. Its non-caustic composition works without damaging the substrates.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Paintbrush, Spatula, Stiff brush

Cleaning
tools

White Spirit, Thinner

Drying between coats

Back in
service

Number of
layers

1-2
BENEFITS
  • For all surfaces: wood, metal, stone, concrete, tiles, glass
  • Gel form, does not flow: ideal on vertical surfaces
  • Easy stripping: no rinsing, quick recoating
  • Multi-layer performance
LOGO (3) copy
LOGO (3) copy
INFORMATION

Thanks to Chrono 10′ technology, Decapant Gel Multi Supports acts quickly to thoroughly strip and expose all types of surfaces: wood, metal, stone, concrete, tiles, glass, etc.

Ideal for effectively removing paints, impregnation varnishes, varnishes, adhesives, coatings, putties, plasters. Its non-caustic composition acts without damaging the substrate.

Without rinsing, it can be quickly covered with the new finish of your choice.

Preparation

  • On furniture, antiques or fragile objects, do a preliminary test in an inconspicuous area.
  • Rubber gloves and goggles are recommended when using.
  • Shake well before use.

 

Application

  • Shake the container before use.
  • Apply a generous layer of Decapant Gel Multi Supports with a brush or spatula.
  • IMPORTANT: some surfaces, under the action of the Corrosive, blister while others soften. The exposure time depends on the nature and thickness of the film to be removed.
  • When the coating has peeled off sufficiently (3′ to 45′ minutes), remove the entire thing with a spatula, without scratching the surface. If necessary, scrub with a stiff brush (nylon or grass).
  • Note: If you want to strip wood, always work in the direction of its fibers.
  • Clean with a damp sponge, which you rinse frequently with tap water. For sensitive woods or veneers, rinse with odorless solvent or Dégriseur Nettoyant.
  • In case of several older coats, repeat the process after rinsing.
  • Let dry thoroughly before applying the new finish.

TIP: Stripping on a horizontal surface will facilitate the penetration of the product. For best results, first sand the layers to be removed with 60 grit sandpaper to facilitate the penetration of the product. On old or fragile furniture or objects, carry out a preliminary test in an inconspicuous area. Do not use on plastic materials. Do not use in direct sunlight, prefer dry, windless weather. It is recommended to wear rubber gloves and safety glasses. Follow the safety instructions.

You may also like

Interkas_DECAPANT-10'-GELIFIE

Decapant Batiment 10′ Gelifie

Multi-surface corrosive in gel form.

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN