Preparation
- Make sure the surface is stable and remove any dirt. Remove old paints that do not adhere well or are flaking and wash the surface thoroughly. Then, fill, where necessary, to have a uniform substrate. After drying, sand with sandpaper and apply a suitable preparation primer.
- Proceed to apply PRIMER 1200 either with a Roller, Brush or with a paint gun.
- After 6 hours at 20°C, apply METEORE 10 and finish with C 100 Over.
Application
Compact Cement
- Thinning: to obtain this effect, do not dilute Meteore 10 Cemento or C 100 Over. Coverage: Meteore 10 Cemento, approximately 1 liter per 1 – 1.5m2, one coat on a smooth surface. C100 OVER, approximately 1 liter per 4-5 m2 for one coat.
Vintage cement effect.
- Dilution: to obtain this effect, do not dilute Meteore 10 Cemento or C 100 Over. Coverage: Meteore 10 Cemento, approximately 1 liter per 1 – 1.5m2, one coat on a smooth surface. C 100 Over, approximately 1 liter per 4-5 m2 for one coat.
Large Cement Slabs – Large Cement
- Thinning: to obtain this effect, do not dilute either Meteore 10 Cemento or C 100 Over. Coverage: Meteore 10 Cemento, approximately 1 liter per 1 – 1.5m2, one coat on a smooth surface. C 100 Over, approximately 1 liter per 4-5 m2 for one coat.
Slim cement (with dilution)
- Dilution: to obtain this effect, do not dilute Meteore 10 Cemento. C 100 Over should be diluted 10% with water. Coverage: Meteore 10 Cemento, approximately 1 liter per 1 – 1.5m2, one coat on a smooth surface. C 100 Over, approximately 1 liter per 4-5 m2 for one coat.
Ground Cement
- Dilution: to obtain this effect, do not dilute Meteore 10 Cemento or C 100 Over. Coverage: Meteore 10 Cemento, approximately 1 liter per 1 – 1.5m2, one coat on a smooth surface. C100 OVER, approximately 1 liter per 4-5 m2 for one coat.
Old perforated cement – Scored Cement
- Dilution: to obtain this effect, dilute Meteore 10 Cemento with 100ml of water per Liter of product. Dilute C 100 Over 10% with water. Coverage: Meteore 10 Cemento, approximately 1 liter per 2 – 2.5m2, one coat on a smooth surface. C 100 Over, approximately 1 liter per 3-3.5 m2 for one coat.
