Interkas_Blatem_PISCINAS

Blatem Piscinas – Χρώμα Πισίνας

Water-soluble swimming pool paint enriched with high quality acrylic resins

Its special composition makes it the ideal product for cement and concrete swimming pools.

Interkas_Blatem_PISCINAS
Blatem_Piscinas_1
Blatem_Piscinas_2
Blatem_Piscinas_3
Blatem_Piscinas_4

Blatem Piscinas – Χρώμα Πισίνας

Water-soluble swimming pool paint enriched with high quality acrylic resins

Its special composition makes it the ideal product for cement and concrete swimming pools.

COLORS

White
White

4,0L/5,0Kg

Blatem Water-based Swimming Pool Paint is the appropriate paint for swimming pools, non-potable water tanks and fountains. It is applied to swimming pools with chlorinated fresh water, seawater and for salt electrolysis systems. Its special composition makes it the ideal product for cement and concrete swimming pools. It is easy to apply, has excellent adhesion, is quick-drying and has high resistance to abrasion and pool chlorination chemicals.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Brush, Roller, Paint Gun

Cleaning
tools

Water

Drying between coats

6 h

Back in
service

24 h

Number of
layers

2-3
BENEFITS
  • Enriched with acrylic resins
  • Suitable for chlorinated fresh water
  • Suitable for salt electrolysis systems
  • Ideal for cement and concrete pools
INFORMATION

Blatem Water-based Swimming Pool Paint is the appropriate paint for swimming pools, non-potable water tanks and fountains. It is applied to swimming pools with chlorinated fresh water, seawater and for salt electrolysis systems. Its special composition makes it the ideal product for cement and concrete swimming pools. It is easy to apply, has excellent adhesion, is quick-drying and has high resistance to abrasion and pool chlorination chemicals.

Preparation and Application

  • The application surface (swimming pool) must be completely clean and dry, and the cement must be well dried.
  • Do not apply when there are high temperature conditions or temperatures below 5°C.
  • Mix the product well in the package.
  • New swimming pools: After the construction of the swimming pool, at least two months must pass before painting, so that the concrete can fully harden and acquire full mechanical capabilities.
  • The surfaces must be treated with a mixture of 1 part hydrochloric acid and 3 – 4 parts water. Rinse (high pressure water) and leave for at least 48 hours to dry.
  • Apply a first coat of Blatem Pool Paint diluted with 15-25% water and a second coat diluted with approximately 5-15%.
  • Use a brush, roller or spray gun.
    • Brush and roller: dilution 5-15%.
    • Spray gun: 15-30%.
  •  If the surface has adhesion problems, first apply an Acrylic preparation primer or on very worn or porous surfaces a solvent-based primer.
  • Old pools in good condition: Rub to remove old paint. Wash with a mixture of 1 kg of trisodium phosphate with 10 liters of water or with a solution in water containing 5% powdered detergent. Remove moss and green growth with a stiff bristle brush. Rinse thoroughly with a pressure washer.
  • Apply a first coat of Blatem Pool Paint diluted with 15-25% water and a second coat diluted with approximately 5-15%.
  • Use a brush, roller or spray gun.
    • Brush and roller: dilution 5-15%.
    • Spray gun: 15-30%.
  • If the surface has adhesion problems, first apply an Acrylic preparation primer or on very worn or porous surfaces a solvent-based primer.
  • Old pools in poor condition: Remove paints in poor condition. If the damaged surface is large, remove all old coatings by sandblasting. Wash the surface with trisodium phosphate or a solution in water containing 5% powdered detergent. Rinse thoroughly with clean water and proceed as for new pools. When old coatings cannot be completely removed by sandblasting and/or grinding, apply a coat of an anti-corrosive epoxy primer to seal the surface and homogenize absorption. After 24 hours, apply at least 2 coats of Blatem water-based pool paint.

Note: The growth of green and moss depends on the correct water purification system.

 

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN