Interkas_WOOD_REPAIR_FILLER_1KG

Aguaplast Wood Repair Filler

Wood Restoration and Repair Putty

Repairs and fills large gaps in wood and timber.

Interkas_WOOD_REPAIR_FILLER_1KG
WOODREPAIR

Aguaplast Wood Repair Filler

Wood Restoration and Repair Putty

Repairs and fills large gaps in wood and timber.

COLORS

Light Oak
Light Oak

1,0Kg

Aguaplast Wood Repair Filler is a putty for the restoration and repair of wood, wooden surfaces and wooden furniture. It repairs missing corners of wooden surfaces and completely rebuilds wood that is missing due to decay.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Putty knife, Spatula

Cleaning
tools

Water

Drying between coats

3-6 Hours

Back in
service

6 Hours

Number of
layers

1
BENEFITS
  • Fills gaps up to 50 mm
  • Easily shaped, shaped and sanded after application
  • Fast drying
  • Sanding and overcoating after 3 hours
  • Excellent adhesion
  • Reinforced with glass fibers
  • Can be coated with most paints and varnishes for wood processing
A+_EMISSION
A+_EMISSION
INFORMATION

Aguaplast Wood Repair Filler is a putty for the restoration and repair of wood, wooden surfaces and wooden furniture. It repairs missing corners of wooden surfaces and completely rebuilds gaps up to 50 mm. It is reinforced with glass fibers and can be coated with most paints and varnishes for wood treatment.

 

Preparation

  • Aguaplast Wood Repair Filler is applied to dry substrates.
  • The substrate must be cohesive, stable and free from dust, grease, wax or any other substance that prevents the proper adhesion of the restoration filler.
  • Remove rotting wood and prime if necessary. All areas contaminated with mold and/or moss must be thoroughly cleaned and then treated with FUNGISTOP or another antifungal agent.
  • Protect metal parts with Beissier CHAMELEON or another anti-corrosion primer. In general, substrates must be treated and prepared in accordance with local standards. If in doubt, it is highly recommended to carry out a test application on a small area to determine suitability, compatibility and application cond

 

Application

  • Use clean water, container and tools to mix the product.
  • Mix in a ratio of 0.4 L water / 1 kg powder. Gradually pour the powder into water, stirring until a homogeneous paste without lumps is obtained. The product can be used immediately. The paste remains workable for approximately 30 minutes at 20ºC. High temperatures will reduce and low temperatures may extend the working time. Do not re-stir the mixture. Do not add water or powder once the product has started to set. Do not add excessive water to avoid shrinkage.
  • Apply using a stainless steel trowel or spatula. Clean tools with water immediately after use.
  • When working indoors, allow ventilation to ensure proper drying.
  • Can be coated with any type of varnish, impregnation varnish, lacquer or paint.

Complementary products

Interkas_TIMPEST-AQUA-ANTITARLO-ALL

Timpest Aqua Antitarlo – Water preservative-therapeutic

Preventive and therapeutic treatment of multipurpose wood

Interkas_WOOD_FILLER_DARK_OAK_200ml

Aguaplast Woodfiller

Flexible fiber-reinforced wood putty

You may also like

Interkas_TOP_FINISH_1KG

Aguaplast Top Finish – Bio based

Ready-made fine-grained acrylic biologically synthesized putty

Interkas_FIBRA-0,75

Aguaplast Fibra

Fiber-reinforced elastic putty

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN