Interkas_UNIVERSAL_PRO_5KG
Interkas_UNIVERSAL_PRO_20KG

Aguaplast Universal Pro

Professional lightweight multi-purpose powder putty

Multi-purpose gypsum putty for interiors. The essential product in the equipment of professional painters.

Interkas_UNIVERSAL_PRO_5KG
Interkas_UNIVERSAL_PRO_20KG
UNIVERSAL_PRO_2
UNIVERSAL_PRO_3
UNIVERSAL_PRO_4

Aguaplast Universal Pro

Professional lightweight multi-purpose powder putty

Multi-purpose gypsum putty for interiors. The essential product in the equipment of professional painters.

COLORS

White
White

5,0Kg – 20Kg

The multi-purpose gypsum putty for interiors Aguaplast Universal Pro is the putty for all jobs. It has excellent workability and application properties. It mixes quickly and easily, into a lump-free paste. It does not shrink and rubs very easily. It allows the application of wet-on-wet layers. It fills holes and gaps up to 50 mm without cracking or cracking. It can be overcoated with paint without the need for a stabilizing primer.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Putty knife, Spatula, Trowel, Blade

Cleaning
tools

Water

Drying between coats

1 Hour

Back in
service

After complete drying

Number of
layers

1 - 3
BENEFITS
  • Quick and easy mixing and preparation
  • Easy to trowel, comfortable to apply, excellent performance
  • Allows wet-on-wet application
  • Dries and hardens quickly
  • Its low absorption rate guarantees higher coverage and performance of the final paint
  • Easy to sand
  • No shrinkage or cracking
  • Excellent adhesion, even on satin paints, old fiberglass wall coverings and other non-absorbent substrates
  • Classification according to EN 13963: Type 4B
  • Allows the finishing of plasterboard at any surface quality level (Q1 – Q4).
  • Fills holes and gaps up to 50 mm
A+_EMISSION
EPD copy
A+_EMISSION
EPD copy
INFORMATION

Aguaplast Universal Pro, the multipurpose plaster putty has a very low absorption rate that guarantees higher coverage and performance of the final paint. It exhibits excellent adhesion, even to satin paints, old fiberglass wall coverings and other non-absorbent substrates and is used both for grouting and finishing plasterboard joints and for troweling on any surface quality level (Q1 – Q4). It fills holes and gaps up to 50 mm and allows for liquid-on-liquid application.

Preparation

  • Apply to dry substrates.
  • The substrate must be cohesive, stable and free from dust, grease, wax or any other substance that prevents the proper adhesion of the Aguaplast Universal Pro multipurpose putty. Remove loose or poorly adhered parts of plaster, mortar, old paint layers, etc.
  • Apply DELTAFIX or another stabilizing primer to stabilize weak and chalky substrates. If necessary, treat absorbent substrates with FIXACRYL or another stabilizing primer to reduce surface absorption.
  • All areas contaminated with mold and/or moss must be thoroughly cleaned and then treated with FUNGISTOP or another antifungal agent.
  • Protect metal parts with Beissier CHAMELEON or another anti-corrosion primer.
  • Repair and seal dynamic cracks with AGUAPLAST FIBRA or FLEX FILL.
  • In general, substrates must be treated and prepared in accordance with local standards. If in doubt, it is highly recommended to carry out a test application on a small area to determine suitability, compatibility and application conditions.
  • Do not apply to substrates subject to constant humidity.
  • Do not apply to glossy surfaces (tiles, mosaics, etc.).

 

Application

  • Use clean water, container and tools to mix the product.
  • Mix in a ratio of 0.45 L water / 1 kg powder. Gradually pour the powder into water, stirring until a homogeneous paste without lumps is obtained. The product can be used immediately. The paste remains workable for approximately 60 minutes at 20ºC. High temperatures will reduce and low temperatures may extend the working time. Do not re-mix the mixture. Do not add water or powder once the product has started to set. Do not add excessive water to avoid shrinkage.
  • Apply using a stainless steel trowel, spatula or blade.
  • After complete drying, the surface is rubbed with fine sandpaper, etc. 240-320.
  • Clean tools with water immediately after use.
  • When working indoors, allow for ventilation to ensure proper drying process.
  • Can be overcoated with any type of paint, topcoat, wallpaper, etc.
  • Decorative finishes can be applied once the surface is dry.

Complementary products

Interkas_CHAMELEON_0,75L

Chameleon

Multi-purpose and surface primer, final finish and stain cover

Interkas_FLEX_FILL_1Kg

Aguaplast Flex Fill

External use elastomeric fiber-reinforced putty

Interkas_FIBRA-0,75

Aguaplast Fibra

Fiber-reinforced elastic putty

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN