Interkas_TOP_FILL_1KG
Interkas_TOP_FILL_5KG

Aguaplast Top Fill

Ready-to-use acrylic filler

Fills holes and cracks up to 10 mm.

Interkas_TOP_FILL_1KG
Interkas_TOP_FILL_5KG

Aguaplast Top Fill

Ready-to-use acrylic filler

Fills holes and cracks up to 10 mm.

COLORS

White
White

1,0Kg – 5,0Kg

Aguaplast Top Fill acrylic filler is used to fill large holes and cracks in interior walls. It is applied to plaster, gypsum boards, concrete, aerated concrete, cement, polystyrene, primed wood, old paint substrates, etc. It is covered by all paints and does not require a primer.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Putty knife, Spatula

Cleaning
tools

Water

Drying between coats

12 hours/mm

Back in
service

After complete drying

Number of
layers

1-2
BENEFITS
  • Fills holes and cracks up to 10 mm
  • Resists shrinkage
  • Excellent adhesion to absorbent substrates
  • Easy to apply and rub
  • Overcoats with most paints without the need for primer
  • A+ product
A+_EMISSION
A+_EMISSION
INFORMATION

Aguaplast Top Fill acrylic filler fills holes and cracks up to 10 mm. It is applied to plaster, gypsum boards, concrete, cellular concrete, cement, polystyrene, primed wood, old paint substrates, etc. It is covered by all paints and does not require a primer. It has excellent adhesion to absorbent substrates.

Preparation

  • Aguaplast Top Fill acrylic filler is applied to dry substrates.
  • The substrate must be cohesive, stable and free from dust, grease, wax or any other substance that prevents the proper adhesion of the filler.
  • Remove loose or poorly adhered parts of plaster, mortar, old paint layers, etc. Apply DELTAFIX or another stabilizing primer to stabilize weak and chalky substrates. If necessary, treat absorbent substrates with FIXACRYL or another stabilizing primer to reduce surface absorption.
  • All areas contaminated with mold and/or moss must be thoroughly cleaned and then treated with FUNGISTOP or another antifungal agent.
  • Protect metal parts with Beissier CHAMELEON or another anti-corrosion primer.
  • In general, substrates should be treated and prepared in accordance with local standards.
  • If in doubt, it is highly recommended to perform a test application on a small area to determine suitability, compatibility and application conditions.

 

Application

  • Ready to use filler putty.
  • Apply using a stainless steel trowel, spatula or blade.
  • Clean tools with water immediately after use.
  • When working indoors, allow for ventilation to ensure proper drying.
  • Can be overcoated with any type of paint, finish coat, wallpaper, etc.
  • Decorative finishes can be applied once the surface is dry.

Complementary products

Interkas_CHAMELEON_0,75L

Chameleon

Multi-purpose and surface primer, final finish and stain cover

You may also like

Interkas_TOP_FINISH_1KG

Aguaplast Top Finish – Bio based

Ready-made fine-grained acrylic biologically synthesized putty

Interkas_LITE_FILL_0,75L

Aguaplast Lite Fill

Lightweight powder putty

Interkas_ALL_4_IN_ALL

Aguaplast All 4 In

Ready-to-use multi-purpose putty for interior use

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

Companies

Armourcoat

Beissier

Blanchon

Blatem

Clayworks

Coprabel’s Easy Color

Fleur Paint

Giorgio Graesan & friends

GUBRA

iD

Little Greene

MaxMeyer

Mr CLAY

OIKOS

Syntilor

TIMPEST

Valpaint

Viero Coatings

2024 Ιnterkas All Rights Reserved | Terms & Conditions

Designed and developed by DURAN

Andromachis 217-219, Kallithea 176 73
Τ. +30 210 9521772, info@interkas.gr

  • Companies
2024 Ιnterkas All Rights Reserved | Terms and conditions | Cookies policy
Designed and developed by DURAN