Aguaplast Express

Internal use quick-drying filling putty

It is used as a direct renovation product for all types of substrates including non-absorbent ones such as glossy paints, tiles, ceramics, etc.

Aguaplast Express

Internal use quick-drying filling putty

It is used as a direct renovation product for all types of substrates including non-absorbent ones such as glossy paints, tiles, ceramics, etc.

COLORS

White

1,0Kg – 4,0Kg – 15,0Kg

Aguaplast Express is a fast-drying, interior filler used for the renovation of damp interior spaces such as bathrooms and kitchens, as well as for smoothing and leveling walls and ceilings. It fills holes and cracks quickly and without shrinkage up to 5.0 cm.

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Stocker, Spatula, Large spatula

Cleaning
tools

Water

Drying between coats

3 h

Back in
service

After complete drying

Number of
layers

1-2

“Express” drying: Can be sanded and covered very quickly, after 3 hours
High filling capacity: Thickness up to 50mm without shrinkage
Allows application wet on wet. The second layer, if required, can be applied before the first one is completely dry
Very easy and comfortable mixing and sanding
A+ product

The Aguaplast Express quick-drying filling putty for interior use is the ideal product when a quick and stable renovation of wet interior spaces such as bathrooms and kitchens is needed as well as for smoothing and leveling walls and ceilings. The advantage of allowing liquid-on-liquid application makes it a very fast product to dry and coat. It fills holes and cracks up to 5.0 cm wide or deep, without shrinking.

Preparation

The substrate must be cohesive, stable and free from dust, grease, wax or any other substance that prevents the proper adhesion of the putty.
Remove loose or poorly adhered parts of plaster, mortar, old layers of paint, etc.
Apply DELTAFIX or another stabilizing primer to stabilize weak and chalky substrates. If necessary, treat absorbent substrates with FIXACRYL or another stabilizing primer to reduce surface absorption.
All areas contaminated with mold and/or moss must be thoroughly cleaned and then treated with FUNGISTOP or another antifungal agent.
Protect metal parts with BEISSIER CHAMELEON or another anti-corrosion primer.
Repair and seal dynamic cracks with AGUAPLAST FIBRA or FLEX FILL.
In general, substrates must be treated and prepared in accordance with local standards. If in doubt, it is highly recommended to carry out a test application on a small area to determine suitability, compatibility and application conditions.
It is recommended to use a fiberglass mesh when covering very glossy tiles or mosaics.

Application

Use clean water, container and tools to mix the product.
Mix in a ratio of 0.45 L water / 1 kg powder. Gradually pour the powder into water, stirring until a homogeneous paste without lumps is obtained. The product can be used immediately. The paste remains workable for approximately 45 minutes at 20ºC. High temperatures will reduce and low temperatures may extend the working time. Do not re-stir the mixture. Do not add water or powder once the product has started to set. Do not add excessive water to avoid shrinkage.
Apply using a trowel, stainless steel spatula or blade. Clean tools with water immediately after use.
When working indoors, allow ventilation to ensure proper drying.
Can be overcoated with any type of paint, topcoat, wallpaper, etc.
Decorative finishes can be applied once the surface is dry.

Interior use

Exterior use

Varnishes - Impregnation products for outdoor use

Varnishes - Wood finishing products for interior use

Wood Floors & Flooring

Artists & DIY paintings - Chalk Paints

Decoration products & Coatings

Decoration tools

Fillers & Smoothing compounds

Bio based & ECO

Aguaplast Express

Internal use quick-drying filling putty

It is used as a direct renovation product for all types of substrates including non-absorbent ones such as glossy paints, tiles, ceramics, etc.

Aguaplast Express

Internal use quick-drying filling putty

It is used as a direct renovation product for all types of substrates including non-absorbent ones such as glossy paints, tiles, ceramics, etc.

COLORS

DOWNLOAD THE TECHNICAL DATA SHEET HERE

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Cleaning
tools

Drying between coats

Back in
service

Number of
layers

Complementary products

Aguaplast Flex Fill

External use elastomeric fiber-reinforced putty

Aguaplast Fibra

Fiber-reinforced elastic putty

Companies

Aguaplast Express

Internal use quick-drying filling putty

It is used as a direct renovation product for all types of substrates including non-absorbent ones such as glossy paints, tiles, ceramics, etc.

Aguaplast Express

Internal use quick-drying filling putty

It is used as a direct renovation product for all types of substrates including non-absorbent ones such as glossy paints, tiles, ceramics, etc.

COLORS

DOWNLOAD THE SAFETY DATA SHEET (On request) HERE

Tools

Cleaning tools

Drying between coats

Back in service

Number of layers

Complementary products

External use elastomeric fiber-reinforced putty

Fiber-reinforced elastic putty

Companies

Ρυθμίσεις Απορρήτου

Παρακάτω μπορείτε να ενεργοποιήσετε ή απενεργοποιήσετε τους διαφορετικούς τύπους cookies:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Η ιστοσελίδα θα:

Η ιστοσελίδα δεν θα:

Cleaning
tools

Back in
service

Number of
layers